|03-09-2010 09:16 PM|
|hankity pankity||how exactly did you test that lol...|
|03-09-2010 08:10 PM|
|jdhallissey||So lets put it this way. Your trans will not fall onto you without the pan there BTW. It drops about 2 inches then the motor mounts are fully flexed out. Why do I know this because I have tested to see how far it will move just in-case I don't have another jack stand to put under it.|
|03-09-2010 07:23 PM|
|03-09-2010 07:09 PM|
It's a whole lot different and a whole lot more in depth and its actually useful rather then some bathroom reading material (not kidding, my FSM sits in my garage. My Haynes sits in the bathroom). He needs your year because the factory service manual changes per year and the private message is because they're technically under copyright, but they're available all over the web. It's pretty much the holy grail of wrangler repair guides.
I will tell you that if you do ever decide to pull your transmission, the easiest way I've heard of doing it is to actually drop (ie: lower) the transmission on top of your stomach and just pull yourself out. It weighs about 60 lbs. so to the face, that won't be too comfortable.
|03-09-2010 07:03 PM|
yeah the mount was fine. it didnt so much fall...kinda shifted.
atthehop, is that much different than a haynes manual?
|03-09-2010 06:08 PM|
|s3nt3nc3d||Did you make sure you didn't damage the transmission mount when it went falling downward...it's been mentioned on here that it's attached to the plate and can tear if you don't undo the bolts in a specific sequence or something like that.|
|03-09-2010 06:01 PM|
|03-09-2010 05:58 PM|
|wolfen||One thing to remember when working on a Jeep.................Yes that part is connected to the one next to it. I learned that the hard way replacing the engine.|
|03-09-2010 05:53 PM|
|hankity pankity||i typed fsm into google...Flying Spaghetti Monster? haha And what are you talking about pm with my year? What do i want?|
|03-09-2010 05:44 PM|
|Atthehop||Sounds like you the the FSM. If you want it PM me with your year.|
|03-09-2010 05:37 PM|
|hankity pankity||Yeah im pretty lucky...the only thing keeping it from hitting me was the driveshaft holding it up|
|03-09-2010 05:26 PM|
Good learning experience....and maybe want to count your lucky stars, transmission on top of human body is not a good experience.
I did my own too and almost did the same thing.
|03-09-2010 05:10 PM|
Well I am a total newb to Jeeps and love to do my own work when it comes to installing parts. Well this past weekend I got my Magnaflow catback in and after being quoted $190 for an install I decided it would make for a fun weekend with the wrenches. Before I go on please be aware that I did this with no Haynes Manual or instructions...just decided to have at it. Well when I looked under the Jeep I saw what looked like a skid plate to me blocked my access to the muffler bolts. I thought to myself," Ill just take this off and have nice access to bolts rather and fight to get at them." Well I took the whole plate off, and my buddy was at the back wiggling the tip to break it free from the mid pipe. When he broke it loose I was under right by the muffler. Thats when the whole tranny shifted down towards my face! Whew! I had no I idea that plate served at the mounting point for the transmission! HAHA Well after that I had to go down to Harbor Freight and pick up a floor jack and some jack stands so that I could get the tranny remounted. Needless to say it was quite the experience. It runs fine now and sounds great! Dont batter me too much haha