|02-21-2007 09:38 PM|
|Todd Morton||will definately consider thanks. I dont see why I couldnt.|
|02-21-2007 09:36 PM|
o, i forgot to mention that I have one in my front d30 and havent had ANY problems with it.
Here's a couple write-ups:
I printed out this one when I did mine:
And this page shows good ideas on how to get the "carrier" out:
(this method worked for me: http://www.stu-offroad.com/axle/d30seals/seal-5.jpg )
You should really consider using the money to buy a vise($30 at HF) and a couple of other tools(if you don't have already) that you would need to do this yourself instead of paying the shop to do it for you.
|02-21-2007 09:34 PM|
|Todd Morton||If I did offend, I appologize. But Really.|
|02-21-2007 09:34 PM|
after some of the shit I have seen in this forum and your offended by the "f" word.
|02-21-2007 09:21 PM|
|02-21-2007 09:20 PM|
|Todd Morton||Lost, they are charging 75 an hour. three hours per. not bad I thought.|
|02-21-2007 09:19 PM|
I purchased them from offroadlockers.com 250 each. Aussie distributers.
Unfortunately all the people I called referenced me to these guys. within a 50 miles.
All I have heard is great from people on the aussie lockers. Just was concerned that this guy knew something I did not.
Scout, I think your right. Thanks guys.....setting my mind at ease..........
|02-21-2007 09:11 PM|
|Rawkon||haha i dont think ausii has ever used there warrenty, becasue there crap doesnt brake the axles do. aussi is on my to install list. lots of people use them and I never see any negative feedback|
|02-21-2007 08:43 PM|
I would have another place install them if I was you.
just wondering, how much do they want to charge you?
|02-21-2007 08:33 PM|
Watch the "f" word.
Did you buy the lockers from them? If not then do they sell lockers? I'm just thinking if you didn't buy them from them they may be mad about that and they're just trying to make your life difficult.
|02-21-2007 07:22 PM|
Aussie Lockers To Be Installed
No I cant install em myself. I am just not set up for any vehicle maint. at my 1 bedroom apartment.
So I took it to the only Service shop in the east bay that would work on it. (FOUR WHEEL DRIVE SPECIALTIES)(CONCORD, CA) I walk in the door and the first thing the guy says is that they will break. "its your money , I'll install em, but they will break".
Now I am worried I made a mistake. After all the researching these, I thought I was OK. But the way this guy was talking its like I will get down the road a mile and will be f-----.
Now its a 01 TJ with a 2.5 liter. Not exactly alot of torque. But hey figured I would make up for that with some decent traction.
Any comments.....I'll take em!!! Just venting, the guy pissed me off.