|09-15-2014 05:20 PM|
|09-12-2014 05:00 PM|
|09-12-2014 12:11 PM|
|09-12-2014 11:22 AM|
|hoytpotater||Anyone know the width of the front Barricade for a TJ?|
|09-11-2014 12:35 PM|
|09-11-2014 12:13 PM|
|huskrjk||I'll just keep randomly posting until I get to 25|
|09-11-2014 08:51 AM|
|WorkinProgress||PM XTRyan and he may help you out.|
|09-10-2014 10:34 PM|
|huskrjk||Interested in the wrangler forum discount code but don't have my post count up high enough :-)|
|09-06-2014 06:07 PM|
|SonicBoom||Thanks! Those are rigid industry dually|
|09-06-2014 06:04 PM|
What windshield mounted lights are you running?
|09-06-2014 04:36 PM|
So far so good, 6 bolts should hold until I speak with them on Monday.
|09-06-2014 04:07 PM|
|09-06-2014 04:05 PM|
|SonicBoom||I didn't, I couldn't find them and figured I could wait for extreme terrain to make everything right.|
|09-06-2014 03:37 PM|
|09-06-2014 02:06 PM|
|SonicBoom||Stock bolts are smaller than these. I picked up some metric 12-1.75 and they fit perfectly. For the fogs I used #8-32x1in but could have gone 1/2inch.|
|09-06-2014 01:33 PM|
|09-06-2014 12:05 PM|
|SonicBoom||I figured something was wrong when I saw a securely taped empty box. I shot him a pm but we are doing a night ride and wanted the bumper installed for it so I am heading to Lowe's to try and get what I need. Of course I have no clue what size need...|
|09-06-2014 11:58 AM|
|Jeffk1975||Shoot ryan XT a pm. I'm sure he will get it taken care of for you.|
|09-06-2014 11:51 AM|
You should have received nuts, washers, and two bolts. (For a front JK bumper)
|09-06-2014 11:07 AM|
|SonicBoom||Do these ship with any hardware? I just received my barricade front bumper and noticed an empty box taped to the bull bar. The bumper was sticking out of the box it came in on the edge and not a single nut. There are also only 3 bolts on each end instead of the stock 4. If it does ship with hardware here's a thought. Tape the box ends!|
|09-05-2014 12:29 PM|
I've got both the front and rear Barricade bumpers on my TJ. I haven't really put them to the test yet but they seem to be really well put together. I also have the rock sliders from Barricade.
Yes, there is a gap but it doesn't really bother me.
|09-04-2014 11:46 AM|
|09-04-2014 10:23 AM|
|WorkinProgress||I used my winch three times in the first week I mounted it to the barricade. Only one was for me . The bumper held fine no worries at all and I pulled rigs much heavier than my own. There is a gap between the flares and bumper but it doesn't bother me. Have had a lot of folks wonder where I got it and what kind it is. If you ever go to flat flares any full width bumper will have a gap. Just depends what look you prefer.|
|09-04-2014 10:00 AM|
I tend to be an avid wincher. A little more than I'd like. I have a 9k badlands winch mounted on the front and I love it. I've pulled others out and myself out of some pretty sticky situations. A couple time pulling buddies out, my jeep would get pulled forward a foot or two but still made the recovery.
You can see all 3 vehicles stuck...
|09-04-2014 07:54 AM|
Hopefully someone will post up pics or a video of a recovery with one the Barricade winches!
|09-04-2014 05:08 AM|
1. Had anyone used theirs for a tough winch recovery? I am curious how they are holding up...
2. Anyone dislike the gap between the bottom of the fender flaps and the top of the bumper? It's it noticeable in person?
I am up in the air between the Barricade and the Rampage. The barricade is 40+ pounds lighter because it is made of a thinner steel. Does that affect the winch recover at all?
|09-03-2014 01:23 PM|
|09-03-2014 12:47 PM|
|08-30-2014 12:12 AM|
Thank you for any help you guys can give, so far this forum is really informative.
|08-30-2014 12:06 AM|
Hello all, this is officially my first post. I have ordered from Extreme Terrain when I purchased my lift. AWESOME PACKING, EXACTLY as ordered. Unfortunately when I purchased the Barricade Bumpers both front and back I had received the Front just fine with all hardware. But the back bumper was TRASHED. I am missing all bolts, I cannot believe UPS was okay with leaving it like it was. My question is does anyone have a parts list on what size and grade for the bolts and washers for the rear bumper? I do not want to wait days to receive new hardware. Ill just pick up tomorrow.
I do not know how to insert image of the trashed box on delivery.
|This thread has more than 30 replies. Click here to review the whole thread.|