|04-16-2010 11:21 AM|
|04-16-2010 10:56 AM|
|ryt2112||I have two short bungee cords that I keep just for the swaybar. I strap it up to one of the supports.|
|04-16-2010 10:42 AM|
|04-16-2010 10:32 AM|
Yep, pull the pin and keep in pocket or glove box and then push sway bar up towards hood and then zip tie the JKS Disco to the swaybar.
|04-16-2010 10:31 AM|
|04-16-2010 10:03 AM|
|bpm54||Ok folks, I assume all one would have to do here is pull the pin to disconnect but, how do you secure it out of the way, with a strap or wire, zip-tie?|
|04-15-2010 10:00 PM|
Sorry a little PC upload glitch.
It should be here..
|04-15-2010 09:55 PM|
Ok troops. here it is in all its greasy glory. Looks like there is a pull pin type quick release on this.
I assume, pull pin and then, what bailing wire to hold it in place out of the way?
|04-15-2010 06:32 PM|
|04-15-2010 11:31 AM|
I'll get a pic of them as soon as I can.
As for the mystery switches. They remain so.
|04-15-2010 11:24 AM|
|04-15-2010 10:52 AM|
Do that on both sides, and then strap them up into the wheel well somewhere so they don't get hit by your newly found flex
Also, if you could post a picture of what you have under there it will help to identify exactly what you are dealing with.
|04-15-2010 10:27 AM|
|bpm54||Ha! I can assure you that's not it.|
|04-15-2010 10:14 AM|
|04-15-2010 10:08 AM|
On the this 04 rubicon I purchased it has these, what appear to be small shocks but, they are not shocks. They have JKS stamped on them and I would guess they replaced the stock Stablizer bar links.
So, these must be what snwcris and kate are talking about. I don't know if they are manual or air actuated. How can one tell?
I have two black rocker switches on the dash panel that I have no idea what they are for. Perhaps for the jks swing bar links?
|04-15-2010 09:34 AM|
|04tjrubicon||off topic kinda....didnt the new power wagons have em?|
|04-15-2010 09:29 AM|
Swaybar links are overated.... just run with out the front links... LOL
Actually I have the JKS disco, but for the past 1 1/2yrs have been running the Jeep with them disco'd and tied up. I'll probably just remove them period.
There's a little more body roll, but nothing to be worried or scared about.
|04-15-2010 08:04 AM|
If you feel like investing a little in a mod that will make it very close to the one on the JK, you can get an ORO SwayLOC.
They have one that's air actuated and a manual for those of us that are budget minded.
I went for the manual, and I think that - to date - it's the best money I have spent on my Jeep.
Just a flick of a little lever and I'm disconnected. No wrastlin around under the Jeep or fighting to get it reconnected.
|04-15-2010 06:21 AM|
Nope only came on the 07 and newer models when the JK was introduced.
It still has pretty good articulation, but if you want better, pick up some JKS Quick disconnects and put on in place of factory swaybar links.
|04-14-2010 10:36 PM|
|bpm54||Thanks so much for the answer. Do you know what the articulation is without the feature?|
|04-14-2010 05:33 PM|
|The Ugly Jeep||
Only on the 2008 and up as an option.
|04-14-2010 05:27 PM|
Electronic Sway Bar Disconnect Question
Did the 04 rubicon come with this feature? I went to the jeep website and it says it is standard on the newer model rubicon. Says with a flick of a switch it will disconnect the Sway Bar in 4L.
I don't see a switch in my 04 rubicon that is related to sway bar disconnect.
Only switch I have on the dash is the axle lock.