|12-17-2013 05:14 PM|
|Backwoodsboy129||Try checking out Lifetime LED Lights or Southern Suicidal Lighting|
|12-17-2013 11:44 AM|
Anyone using low-outside windshield KC mounts #7317?
I had planned on Rigid driving lights LED #50231 ($290 on Amazon) but am now considering Black Box comparable.
|11-09-2013 10:40 PM|
|RDRINK25||I am more leaning towards round leds wish they had smaller ones like the the square.|
|11-08-2013 05:31 PM|
I got the switch installed into the A=Pillar Trim. Found a spot to tap into the fuse panel. Did a Test fit. I waiting on Brackets so I tried one here. Give two axis of rotation (where as on the windshield base only gives one axis and with the sweep they aim to far outboard. )
Pay no attention to the temp wiring. this is so I could test it.
The blue tape is to hold the nuts into the light. wouldn't need to do that if i had the normal type of brackets.
Not sure if I'll keep them here or go with the Windshield brackets.
|11-08-2013 01:20 PM|
I mounted them on A-Pillar brackets that are produced for Seward by Pat Harrison (traliskinz.com). The brackets support the A-Pillar mounts, a 50" Twin light bar and the Limbriserz cables (which raise trees as you are driving through the bush). The brackets are beautifully done.
I have the floods aimed slightly outward for peripheral visibility off-road but you can also get the T-2's in spot as driving lights.
Here are a couple of pics:
|11-08-2013 12:12 PM|
I just got the BBL RX2's last night. (spot's)
Touched off to the battery and they are Bright!
could see it on the Neighbor's house across the street about 400 feet away.
Not bright on the house, but you could see it lighting it up.
The road in front of the house was well lit at about 100 feet.
I might mount them to the second bolt down on the outboard side of the windshield frame with only the bracket that came with them.
I'll know later tonight.
|11-07-2013 10:23 PM|
AMP Draw. 1.45
|11-07-2013 09:59 PM|
Input Voltage: 9-32V DC
Power Consumption: 3W*6pcs (CREE chips)
CREE High Power 3W LED Technology
Color Temperature: 6000K
Beam Pattern: Spot \ Flood
Housing Material: Die-cast Aluminum
Lens Material: Polycarbonate
Mounting Bracket: Stainless Steel
Electronics: Integrated-Epoxy Encapsulated (IP67)
More Information can be found at this link. Black Box Logistics - RX Series
|11-07-2013 09:53 PM|
|Kevlars||How many lumans?|
|11-07-2013 09:36 PM|
How's this for the ones on the windshield mounts?
|11-07-2013 08:59 PM|
|RDRINK25||Does anyone have a pics of the Black Box's from the front on a JK?|
|11-07-2013 01:19 AM|
|11-06-2013 11:49 PM|
3" RX2 Series Square LED Driving Light (Pair)
Used Smittybuilt windshield brackets. They keep the lights low to the side, not a distraction while driving. Almost out of sight from the drivers seat.
And this finished product looks like this
|11-06-2013 10:47 PM|
I have the Rigid Dually D2s but have heard good things about these as well. I haven't seen them in person but they look very similar and about half the price...
Seward Offroad | LED Lights for Offroad and Marine
|11-06-2013 10:45 PM|
|Kevlars||Very nice ... I prefer Rigid as I live in Phoenix so they are local. and the Quality is outstanding ... you get what you pay for.|
|11-06-2013 10:43 PM|
|Canesfan||For what it's worth (hear me out here), my dealer has the Rigid D2's in stock packaged as Mopar spot lights. I bought a pair, but here's the kicker: Mopar has them boxed and priced as the original Dually's (D1) so I saved nearly $200 on them. Just a thought, might be worth checking with your dealer.|
|11-06-2013 10:32 PM|
So, here goes the big war...again
Before you dump a huge amount of cash (or load your credit card),
check out Black Box Logistics. They make an excellent product, and
at a price that will not put your card in melt down mode.As an added bonus, the customer service is excellent.
|11-06-2013 10:05 PM|
|Kevlars||The d2 are awesome|
|11-06-2013 09:47 PM|
|RDRINK25||Thanks those LED's was exactly what I was looking for!|
|11-06-2013 09:44 PM|
Rigid Industries 50231 - Rigid Industries Dually D2 LED Light Pair - Driving Pattern - Quadratec
Rigid Industries 40139 - Rigid Industries A-Pillar Light Mount Kit for 07-14 Jeep® Wrangler & Wrangler Unlimited JK with D Series Lights - Quadratec
Does this work.
|11-06-2013 09:12 PM|
I am looking for lights that mount on the hood by the corners. I want them to be square or box style. Any recommendations?