|04-29-2010 07:40 PM|
I used a piece of 1/8" plywood the real cheap stuff and used it to mock up my flat dash. I used autometer gages and factory speedo. When I was ready I used 1/8" aluminum plate and used hole saws that I got from McMaster carr, There is at least one pic of the dash in my build thread
|04-27-2010 09:52 AM|
|Jaydogg25||hehe yea cardboard is my best friend right now..lol|
|04-26-2010 10:27 PM|
|sevenservices||to make your fabrication changes easier for testing ideas... use cardboard. You can paint it flat black if you want a different look. It can be easily cut, moved, changed, bent, etc... Then, once you settle you can use the cardboard to make a stencil. Cut it out of thin wood and cover with fiberglass for nice rounded and smooth edges or go with steel for the sharp flat look.|
|04-25-2010 09:57 PM|
Yes i saw that 1kooljeep. thanks.. just goin to try to make it alittle more flush.. maybe i wont make it flat idk.. guess i'll mess w/ my templates
Engine Mounts this makes it easy
|04-25-2010 09:08 PM|
|tmulholland24||Yea I got my 2.5L really cheap considering its condition, I dont think i will be able to find a 4L in that type of condition for the money i spent. The one thing that sucks is that the motor mounts for bigger engines are not the same|
|04-25-2010 10:27 AM|
|1kooljeep||This will be a good spot for you to look and get some ideas.CLICK ME|
|04-25-2010 09:59 AM|
most will probably tell you sell the 2.5 and buy a 4L bc in a lot of cases will probably be cheaper. but i have done alot to my 2.5L over the years so i want to keep it, plus since it's not my every day driver i can take my time and look for deals on parts etc. nice having a friend thats a mechanic so that helps alot in Labor and in finding things.
Right off the bat i plan on, engine, trans, front & rear axles, probably transfer case, SOA. some other things i know i'm missing
my friend found a old Chevy w/ 350 and turbo 400 trans in it. that i can get for cheap probably like $400, will rebuild before i install. then just missed another friend sellin a ford 8.8 for $75, so i was pissed about that, but just my luck. lol
alot of it is probably luck finding parts. bc find a good used engine like me it's cheap, order it from a company could have several grand in just that.
but we're still lookin for parts..once i hear back from him i can make a list. but that could be this week or weeks down the road...lol
|04-25-2010 12:54 AM|
|tmulholland24||i have a 2.5L and would really like to upgrade, how much is it going to run you to upgrade to a 350?|
|04-24-2010 10:28 AM|
|paul66||If your going to make your own why not make it so the gauges are tilted towards you so they are easier to see?|
|04-24-2010 09:54 AM|
|Jaydogg25||yea i agree i have seen stuff like that as well and looks good in pictures. just seems some of the gauges further away may have a issue seeing them. maybe i'll just mess with it and see what happens|
|04-23-2010 07:54 PM|
i read about a cj dash kit that looks prety sweet. seems like alot of work but the end result would be spectacular.... copy and paste web address below
|04-23-2010 03:42 PM|
in the very near future i will be starting my engine swap in my YJ, good bye 2.5L hello 350..lol. so i figured its time i start looking @ my options to re-do my dash. i dont realy care for factory layout. i'm trying to get ideas of things i will need. i always prefer to start planning on 1st.
I see a lot of people that install diamond plate, or some sort of metal dash. keeping it flat. For example found these pictures online:
now it goes look very nice and clean, but also looks like there could be a issue seeing some of the gauges. i have been making test boards using 1/4" wood to get a idea and it does seem like will be more of a issue seeing whole gauge. anyone try a dash like above? if so how do you like it any changes you recomend? i could always fiberglas the dash.. prefer not to bc of all the time etc..but something i can do lol if worst comes to worst.
some items planning on installing in dash.
Air pressure (for compressor)
Amp (so I can see the draw).
Figure these would be only gauges I need unless anyone can think of any I missed.
Warning Lights: Check Engine, Alarm LED, Turn Signal
Donít know if I need anything else, figure dont need high beams
Other items in dash:
Lots of switches for lights
Main Power Kill Switch
anything i'm missing, should not use? anyone have any ideas?
thanks for any input