|05-05-2010 03:04 AM|
|eg6hatch||actually you cant on a 07 and up jeep. Chrysler stopped using a actual voltage wire to turn the radio on and use a data signal...|
|05-04-2010 01:06 PM|
|woodsballnc||You could always tie into the radio lead thats what I've always done.|
|05-04-2010 12:48 PM|
|TDCoffee||I actually found a switched line inside the cover on top of the stereo (center) stack. I think the lead that is there is for Nav? Anyway, my amp needed powere plus a switched lead, and I used one of the wire I found there with no problems. I've had the set up for a year and it works great.|
|05-03-2010 12:45 PM|
Mount an auxiliary fuse panel under your glove box and use the left outlet to trip a relay for it; then pull your main power from the battery.
Nice fuse panel
40 amp relay
|05-03-2010 12:08 PM|
|05-03-2010 11:41 AM|
|vics07||Im going to upgrade my sound system with an amp and some speakers so im just looking for a switched source for the amp. A buddy of mine said that the 12v outlet on the left should be a switched source and I just wanted to make sure before I started the project.|
|05-03-2010 10:45 AM|
Where? What are you doing?
I used the switched power outlet in the cabin for one and a parking light for another.
|05-03-2010 09:54 AM|
switched ignition source
Does anyone know the best place to find a switched ignition lead to tap into on an 07?