|05-03-2010 09:27 PM|
|05-03-2010 09:25 PM|
Nearly any local 4x4 shop should have at least several non-dropped Pitman arms in their junk box they removed from previous jobs they have done. Parts stores rarely carry them. I would call all your local 4x4 shops and tell them you need the stock Pitman arm for a TJ, someone should have them.
And caution that some of them are CLUELESS and will try to talk you out of going back to the non-dropped Pitman arm. The Wrangler TJ's steering geometry is different from most other 4x4 trucks and even the older Wrangler YJs that did usually require dropped Pitman arms after a suspension lift was installed.
There ARE times a Wrangler TJ requires a dropped Pitman arm but your TJ's configuration is not one of those... yours should definitely not have one.
|05-03-2010 09:21 PM|
Ok, thanks a lot!
Anywhere I can find an OE pitman arm? I looked on 4wd and they only have the 'Drop Pitman Arm'
|05-03-2010 09:17 PM|
The only thing you'll need to do after reinstalling the correct (non-dropped) Pitman arm is to straighten the steering wheel which is very simple and takes just a few minutes. No alignment shop is needed for that, just a simple wrench & a big pair of pliers. Here's how... (it's down a little ways past the toe-in adjustment procedure)... Basic Jeep Front End Alignment
|05-03-2010 09:14 PM|
|Bignuke||Also, will I need another alignment?|
|05-03-2010 09:13 PM|
|Bignuke||Ok, so even if I have a 4" suspension lift, it won't matter if I have the stock pitman arm?|
|05-03-2010 09:09 PM|
First, replace that dropped Pitman arm with the factory OE Pitman arm. Your dropped Pitman arm is not only loose on the steering shaft as you can see, that it is a dropped style also means it is causing bump steer too. From the video, I can see your trackbar behind the drag link is at stock (non dropped) height which means you should not be running a dropped Pitman arm.
When you get the factory Pitman arm installed, the installer will use an impact wrench to tighten the nut which will push the new Pitman arm up further on the steering shaft which will remove the play you are seeing.
|05-03-2010 09:05 PM|
Steering Wheel Play Solved! but questions. (video)
as most of your from my other thread, I have been having some steering wheel play, and I thought it would be the alignment, but it wasn't... It was the pitman arm.
The place I had the alignment done said it was the pitman arm and that I had some playin the steering wheel, so they fixed it and made it all nice and tight, but about a week later, it started to happen again. I took it back and he said the problem this time were the drag link 'C' clips that mount the threaded sleeve on. So he tightened those nice and tight..
Today I figured, what the hell, why not try something, so I went out tightened what he told me to, but I still had play... I mean I'm a man and everything but that pitman arm bolt is a you know what...
Here is a video of the problem... I got my dad to move the steering wheel, you can move it about 1-2 inches until you actually start moving the tires...
YouTube - Pitman Arm play
What can I do to get this fix on my own?? What tool? I tried to use a big cresent wrench but it wouldn't budge...