|11-10-2013 01:16 PM|
|Nigelthornberry||All these pics and descriptions were extremely helpful.|
|08-15-2013 03:57 AM|
I have a stock Rubicon that comes with 4.10 gears and 31ish tires and it moves fine. I'd try your current ratio before spending the money on a regear.
|08-15-2013 03:38 AM|
Since were on the topic of Diff. I have a 97 Wrangler 2.5L 4 Cyl. And i have plans to put a 2" Sus. lift and a 1.25" BL with a 1'MML just to be safe.
Cause I want to fit some 32" in there and with my TJ being a 97 with the stock dana35 with 4.11 ratio. will the stock gear ratio make them move or would it be better to put in a 3.73 ratio or something else?
|05-27-2012 10:10 PM|
However when you have Lockers installed, it MECHANICALLY locks the two wheels into a stiff axle, one wheel cannot move without the other. therefore it doesnt matter if you have one wheel up or not, you build alot more torque.. but just like jp2611 said, it gets squirrelly when you have to drive on dry ground, pavement, or even when your trying to drive on snow or ice effectively...
at least thats how it was explained to me.
|04-24-2012 04:58 AM|
If you have a locker in your rear axle both wheels turn all the time at the exact same speed. If you also have one in the front than all 4 wheels turn at the exact same speed....this works really well in mud or loose dirt.
But can you imagine what happens when you try to drive on a solid, good traction road surface? Your vehicle will jump as you try to turn one way or another. There are a lot of different kinds of lockers, and some are "true" lockers and some are not.
I don't know enough to tell you what is best or how many there are.
|04-23-2012 12:23 AM|
On a related topic....
WTH do lockers do? Forgive my ignorance, I grew up around purpose-built autocross cars. The only SUV the family owned was an 03 sporttrac. I'm very new to the world of 4x4's.
|08-30-2011 04:51 PM|
|rocket4x4||thanks for the info. i was just about to post about what axles i may have til i saw this.|
|08-07-2011 08:05 PM|
|The Fireman||Very helpful and informative. Thanks!|
|04-05-2011 01:07 PM|
|Jerry Bransford||All factory TJ Dana 44 axle shafts are 30 spline. The standard Dana 35c axle shafts are 27 spline, and the front Dana 30 axle shafts are also 27 spline.|
|04-05-2011 12:59 PM|
|StPaul74||This info in this thread has been pretty helpful for me. The guy at the auto parts store told me I had to call the local Jeep dealership to do a VIN search to find out what type of axle I had on mine. Thanks to the photos posted on here, I didn't have to do that. HOWEVER, the next question he asked was how many splines does mine have?! It's a Dana 44 on a 2002 Wrangler TJ Sport. Can anyone answer this for me? I have to replace the passenger side because the old one will no longer seal due to wear which is causing me issues getting my brakes replaced due to leaking fluids. Any guidance would be very appreciated.|
|04-05-2011 08:06 AM|
Have a good one.
|04-04-2011 11:55 PM|
Your's being a 04 sport ...It is stock with a D30 front axle and the rear can be either a D35 or D44.
|04-04-2011 11:47 PM|
|jp2611||scribed I gotta know|
|10-07-2010 07:58 AM|
it does look that way..i was thinking the same..i'll have to take a closer look today..as it was dark last nit when i too the pic.
Hopefully its just 'trick photography'. I'll get a better day pic to confirm.
|10-07-2010 07:50 AM|
|10-07-2010 07:41 AM|
took a quick photo
Rear Axle shown...........D44? It doesn't have oval look of the D35. Comparing my photo to the OP photos
Bad Photos i know...
|08-10-2010 05:23 PM|
What was changed was the gears in your axle then it's just a regular old' jeep D44 with new gears. The only cast number on the axle will but just left of the diff cover on the center section under the tube....what the numbers mean...you got me there...but they mite lead you somewhere bud.
|08-10-2010 03:54 PM|
|Gee oh Dee||
Its an 87 Cherokee. D44 with ARB airlocker. I'm pretty sure its the stock rear for the truck, but the components are obviously not stock.
|08-05-2010 09:39 PM|
|distortedtj||^^^ daily...even if it was it's own sticky in bold....people still ask.|
|08-05-2010 06:22 PM|
|08-04-2010 11:54 PM|
^^^ This is simple a "what axle do I have thread".....STOCK FAQ for wranglers.
As for your "modded truck with a D44....is it a stock factory jeep D44?
|08-04-2010 11:47 PM|
|Gee oh Dee||
This thread doesn't make anything perfectly clear. I'm still new to Jeeps, but most other cars I've worked on or owned have had model numbers of some sort cast into them. Or some sort of determining factor. For example, my 98 TJ did *NOT* have the traction lock rear diff, so I'm assuming that its got the D35. The pics that have been posted also fuel this theory, but I'm unable to be sure, mostly because I'm a pain and am overly undecided.
Was anyone smart enough to cast any numbers on the diff to indentify exactly what it is and what year it was produced?
I wouldn't be such a pain but I've got a modded truck with a "D44" but I have no idea how to be sure or what generation the D44 is.
|08-04-2010 10:35 PM|
TJ/LJ FAQ "newbies this one is for you"
|08-04-2010 06:57 PM|
|03 RUBI||A moderator should start a stickie for axle I.D.|
|05-13-2010 11:01 AM|
|kjonwg||Well i do drive it on the street on a nice day or if there is snow on the ground. But I go wheelin as much as i can, im not really interested in making it a trailer queen so i dont want to go to drastic but just enough were i can still have fun.|
|05-07-2010 06:15 AM|
Hate to answer a question with a question, but what are you planning on doing with the rig?
|05-07-2010 12:27 AM|
|kjonwg||Hey guys im still a NEWB at all this. I was wondering what would be a good front and rear end for my TJ? Im wanting to run 35's eventually..|
|05-06-2010 11:45 PM|
|05-06-2010 11:39 PM|
However I went with a Detroit in my rear 14 bolt since it was about $500 cheaper than an ARB.
Went with an Ox in my front 60 just to try somethin different
|05-06-2010 10:51 PM|
^just one of my references.
And by far, the pot calling the kettle...
|This thread has more than 30 replies. Click here to review the whole thread.|