|06-22-2010 12:48 AM|
this is cool idea...now in my to do list
copper wire mesh
|05-13-2010 08:11 AM|
here is an idea if its not too late.
Delta Tech 01-6580-50 - Delta Waterproof Third Brake Light LED Lug Nut Kit - Quadratec
|03-06-2010 10:56 AM|
|Bignuke||I would do that but I don't that bracket that is supposed to be in the tailgate connecting to voltage to the hole..|
|03-05-2010 01:15 AM|
That centre of the rim Idea is pretty cool ,
but wouldn't that recquire removing the centre cap?
|03-05-2010 12:36 AM|
|Rawkon||it would prolly be easiest to tap off the brake light. run the wires to the center of the rim and silicone a mini round LED in place. or tap off the contacts in the tailgate.|
|03-04-2010 10:19 PM|
Rear brake light wiring..
I looked in my shop manual not long ago and I found the diagram of the rear 3rd brake light assembly.. I opened the tailgate and I guess the previous owner took the bracket/wiring out of the tailgate... It's not there.
Where can I get replacement? And how should wire my wiring so the 3rd brake light will sit on top of my Smittybuilt swing away...?