|12-28-2013 05:05 PM|
|Alex_perales||Hey I'm new to this forum so I don't know if I'm doing this right, I've been really interested in keyless entry for my 01 tj and every post I've seen keeps going back to your thread (witch is great by the way !). Except I need help on which one you ordered. Can you give me the link for the product page witch you got because I don't want to order the wrong one. Also dose the remote have 2 separate buttons for locking and unlocking? Thanks|
|01-31-2013 09:13 AM|
|kps0927||I was planning on running a power wire for the controller to an Add-a-fuse through the hole in the passenger dash wall. How did you get constant power for your mod?|
|01-30-2013 06:19 PM|
Ok, picked up the MES kit and the 2 pin disconnects for the rear doors of my JKU but needed to get minimum 5 pin for the front doors as there are five wires.
1. I need to buy some butt splices to accommodate the wire from the actuator to the quick disconnect that I will leave in the door right at the exit. What is wire size of actuators. Eyeballing it looks like 18awg. (I just ordered so I do not have them in hand to check)
2. I assume you use the actuator and the wire supplied to get to the edge of the door where you splice the SAE2pin. On the other side you will have to splice again to the wiring before terminating at the controller, Yes?
|01-29-2013 10:37 AM|
|doclouie||I like the surface mount switch and would recommend it. That site is also run by the biker guy. Tell him what you are doing and he will point you in the right direction.|
|01-29-2013 07:35 AM|
I know this thread is a bit old but just picked up a 2013 jku before end of year and wanted to add the power locks. I went to the mes site and it looks like the AVI-2101 is the kit we need (for 4 door). I do not want the alarm. I also see the surface mount switch as an option. Can you confirm this is correct? Also the link to the bohemian biker blog does not work but through search found that it links its store to Solar Capitalist LLC. Can you also confirm part# for the sae 2pin disconnect.
|03-07-2012 08:33 PM|
|doclouie||Happy to help with any questions.|
|03-07-2012 11:29 AM|
Beats getting quoted $250 per door... -_-
|01-25-2012 02:34 AM|
|TLATEOTW||i forgot to do that, and was lazy since then! i have hard top too and the tailgate lock is definitely important|
|01-24-2012 07:17 PM|
So I have gotten a few questions lately on my install. I still have had no problems with it at all. The only thing that I added to it was a hidden switch for the rear tailgate so it can be secure even when the top is down and the doors are off. This way you can't just hit the center console button and unlock the tailgate and take my tools and subs.
I did this mod so I can lock my vehicle as it has a hard top for more than half the year and I do not want to fumble with keys when it is pouring rain. I just click the remote and it is open.
|01-24-2012 04:37 PM|
|TLATEOTW||bought it from from a car electrician, the module that controls the locks is programmed to the remote from factory, i tucked it under the dash|
|01-24-2012 04:24 PM|
Either way, looks good. Great Job.
Where did you get the remote from? How did you get it to work with your keyless?
Thanks for the help.
|12-29-2011 03:00 AM|
|12-27-2011 05:50 PM|
TLATEOTW, I see from you photo that you used a factory remote ( I assume for a keyless entry system you added with your power locks). How did you do this? Did you just program the a factory remote to work with your aftermarket keyless entry?
I'm adding power door locks and a keyless entry from Electric-Life and don't like the remotes that come with the kit. I'd like it to look factory as possible.
Thanks for the help.
|09-16-2011 03:20 AM|
|TLATEOTW||i did mine with power windows too, total cost was 160$|
|09-15-2011 10:32 PM|
I have a hard top and always lock the doors out of habit.
I also lock my keys in the car all the time lol worst habit ever. I'm gonna install these actuators with a hidden unlock button outside the jeep like on xxx so I don't lock my keys in the car any more.
|03-03-2011 09:24 AM|
|03-03-2011 06:02 AM|
Excellent pics and info. Nice job!
I'm kind of surprised that anyone would bother to do this to a TJ, though.
|03-02-2011 07:24 PM|
|doclouie||When I debated about someone else doing the install the only places that would do it are car audio places, but their prices were through the roof.|
|03-02-2011 05:09 AM|
I was wanting to install power locks with remote entry but I don't want to do it myself. I was wondering where can I go in Dallas, TX to have this done.
|09-12-2010 01:49 AM|
|GoinPostal88||Hate to bring threads back to life but thanks, this really helped me. I too live in a shady area where things like to go missing. Not to mention being a postal worker I have VERY precious cargo in my Jeep. I need to add an alarm FAST. 5 Stars for you and also a :beer:|
|06-01-2010 08:09 AM|
|06-01-2010 12:12 AM|
|doclouie||Take a look at the posting and the pictures and if you have any questions let me know. I would love to help another Jeeper out there.|
|06-01-2010 12:02 AM|
|05-16-2010 05:23 PM|
|doclouie||I have both a soft top and a hard top and it is put in the garage at night.|
|05-16-2010 02:09 PM|
|rogertc1||Is that a soft top? With my soft top I'd rather they open the door than cut the top myself. I never lock the doors.|
|05-16-2010 02:07 PM|
|05-16-2010 09:31 AM|
|doclouie||Same place as the lock motors. See the first post in this thread. They have several kinds.|
|05-16-2010 04:46 AM|
|Zeep||Where did you source the switch that you have on the console?|
|05-16-2010 01:43 AM|
|doclouie||I debated about doing contact pins, but don't get into the back enough to worry too much about it.|
|05-16-2010 01:41 AM|
I'm not liking how the wiring needs to be done in the back.
That's a big eyesore IMO.
It's kinda making me want to skip doing the tailgate.
I dunno...we'll see.
|This thread has more than 30 replies. Click here to review the whole thread.|