|05-17-2010 12:02 PM|
|pakman55||thanks geoff, Im going to pick up some of the quick release knuckles. Thanks for the input.|
|05-17-2010 11:22 AM|
I think you're referring to the Pivot Knuckle Bolt (#V below).
The problem with replacing this bolt with hardware store stuff is that you need the bows to pivot smoothly, yet still fit snugly. Because of wind pressure, there's a lot of stress at that connection point, so a loose fit may cause issue.
The cotter pin solution is fine, but might be a short term thing, unless you get a really nice fit.
You can call 800-845-3567 and ask our support team for some. Don't know what we charge, but it's always a little more than it should be (we aren't really in the parts business). Quad may also carry them. They cant' cost that much.
For $25 bucks you can get "quick release bow knuckles" that use a little spring mounted pin. It's a nice upgrade.
|05-17-2010 07:36 AM|
|05-16-2010 10:48 PM|
|distortedtj||Or go to lowes or other hardware store.Pick up some cottor pins in 1/4'' and a few washers and the cotter keys....take them off anytime and no tools needed.|
|05-16-2010 02:43 PM|
|05-16-2010 02:35 PM|
|Bruck||I'm assuming you mean locally...Not sure you are going to have luck there other than going to a dealership. If you can wait, get them through Quadratec. If you go through them they have cool disconnects to replace the screws.|
|05-16-2010 02:08 PM|
I took the soft top off this morning and I stupidly lost the screws that go to the arms. They attach to the part of the sport cage behind the front seats. Anybody know what size they are and where I can get them?