|05-18-2010 03:37 PM|
|canadianwizard||now is the perfect time to throw in some new speakers an amp and let everyone hear what u are hearing just dont let the cops catch ya..|
|05-18-2010 03:20 PM|
|zerokoo149||I got an aftermarket soundbar and had to do the wiring myself. It really only took about 30 mins with everything in the jeep being so open.|
|05-18-2010 11:49 AM|
|erickpl||My 97 SE didn't have squat, just like Jerry mentioned. I used that as an opportunity to use quality speaker wire.|
|05-18-2010 11:33 AM|
|Jerry Bransford||Unless your '97 came with a factory rear sound bar, there is no rear speaker wiring at all. You'll have to add it all the way from the rear of the radio to the sound bar.|
|05-18-2010 07:08 AM|
|nick50471||My 97 has a white molex style connector on the drivers side of the bar tucked under the fabric. Pull apart the velcro fabric that wraps around the bar and the connector is underneath.|
|05-18-2010 06:34 AM|
|Flameeater||I dont know how much help I can be here but I will try. I just put a sound bar on my rig. It had a pigtail on it as if it needed a plug but there was no wiring on my roll cage at all. Apparently some jeeps had them some didnt. If there is not a harness going up the drivers side of your cage then you will have to run wires yourself.|
|05-17-2010 06:38 PM|
|Rogue Status Wrangler||
97 Wrangler Sound Bar Questions??
I just went out and bought a sound bar with polk audio speakers in it. Based off of what I see you plug both the speakers and dome light in with that wiring harness that is built into the sound bar... How do I know if this will work with my jeep?? I have the pre-drilled holes in my roll cage but I cant find the male end to the wiring harness. It's a 97 wrangler sport. Please Help me with this install! Thank you!