|05-23-2010 09:47 PM|
|05-23-2010 07:33 PM|
- You did not indcate what model year Jeep. The underdash wiring changes.
- You did not indicate what kit that is. On my Mopar wiring kit for my 03, no wires needed to be cut.
|05-23-2010 07:18 PM|
|MUDDUMP||sorry everybody it was my mistake, there was a grey/white and a blue/white and i was seeing red. got it all wired up and realized i should has payed more attention to step one. the plug isn't the right one for my hardtop and i should have pulled the wires past the middle roll bar first.|
|05-23-2010 06:55 PM|
|deathphoenix99||If you need wiring diagrams, email me at email@example.com and tell me what model/year you need.|
|05-23-2010 03:41 PM|
|doclouie||Best bet is to find a wiring schematic for your year. This is way specific.|
|05-23-2010 03:35 PM|
|drivebytruckerz||I don't have a hard top.|
|05-23-2010 02:20 PM|
|MUDDUMP||are ya'll serious?! nobody has done this before?|
|05-22-2010 06:49 PM|
stuck on hardtop wiring
everything has been going pretty smooth up until step #35. i found this plug and cut back the tape and there are 2 blue/white wires going into the connecter. i'd really like to figure this one out before i did anything else.