|03-08-2014 01:00 AM|
|Jtaylor1129||IMO if possible, just bite the bullet and buy a warn. You won't go wrong. There's a reason they're the biggest name out there... And personally for the situations I use my winch in, I wouldn't want the slightest bit of doubt about if it was going to work properly or not.... That's just my thoughts though|
|03-05-2014 12:08 PM|
Well, look at it this way......the rebuild will be FUN!!!
Good luck, bud! You'll have her rolling before you know it.
|02-28-2014 12:30 AM|
Have you seen this pic?
|02-24-2014 02:43 PM|
OP, looking at the original post, you said your cheap winch has cost you thousands in bodywork.....coulda used that money on a Warn, I guess......
My Daddy always said "good things are not cheap, and cheap things are not good...."
He was so right.......sorry about all your troubles, though, Bud!!!
|02-24-2014 02:38 PM|
|02-21-2014 07:03 PM|
|ztman||OP, did State Farm cover the off road park wreck?|
|02-21-2014 06:46 PM|
|jeepwayoflife||I've had some good and bad luck with my Engo 9000lb winch. I've had it for 2-3 years now and the only thing that has happened is one of the solenoids died, leaving me in a stick situation. Other than that its been fine.|
|02-21-2014 06:22 PM|
|SEAICE||Parts for a Warn are cheap and they're almost always rebuildable. I bought a used Warn x8000i for $250. The brake didn't work and it was noisy. $150 in parts (mostly for the brake and sun gear) and paint and I have effectively a brand new $1,200 winch. It works perfect... smooth and quiet.|
|02-21-2014 02:05 PM|
|Eckoh||just wanted to get this back on the main page. Tax time is soon so people don't end up losing money by trying to save money on the wrong item.|
|01-11-2014 07:46 PM|
Got a new tub... Turns out to be cheaper... JW JEEP cut me a great deal on the 97 moss green tub.. My tj is a 98 so it will work so probably just doing a full tub swap
|01-04-2014 02:22 PM|
|01-04-2014 01:04 PM|
|01-04-2014 01:01 PM|
|tearin_dirtup||On a up note I found a Warn xd9000i for $495... Is that a good deal?|
|01-04-2014 12:59 PM|
|tearin_dirtup||I talked to pretty much every body shop within 2 hours of my house over my break and every shop is going to charge me all my limbs to fix it or the cheaper shops say it is too much work and so I now looking at the option welding in a new back half of the tub...|
|12-18-2013 02:51 AM|
Thanks to all your posts I gotta a lot of tests this week before break so I am kinda trying to focus school... But it is so hard... Honestly it sucks seeing my jeep like that state everyday and I just quit my job due to an issue with management I couldnt take it anymore. So no more money.... So blow it on a Jeep My dad seems to think my winch is fine but he doesnt off road or anything just a businessman who is smart as hell and doesnt like spending money. I am researching places near me to go get qoutas!!!
MY PLAN (willing to take advice.. kinda why i started the thread)
1. Find good shop
2. Find the parts I need
3. straighten out the tub
4. passenger side inner fender and rear tail light holder
5. get new tail gate and bolts(no more torx they piss me off)
6. repaint jeep with tractor paint in my garage
7. put on savvy corner armor
8. buy and install soft top
9. enjoy a closed jeep!!!!
|12-17-2013 07:36 PM|
|1jeeplvr||Not trying to beat a dead horse here but Id seriously save up for a decent winch.I have a Warn,the only issue I had was the freewheel lever wouldent turn so I dissasembled it,found the gaskets leaked & caused water to get inside.Called Warn & they sent me gaskets.I think a winch is something you dont skimp.My next winch will be a Warn but I wopnt get another one of there VR line of winches.Maybe a Zeon or M8000.|
|12-16-2013 11:02 PM|
Op, I would seriously consider buying that complete tub for $1k and doing the swap yourself.
I don't think having a shop attempting to straighten your current will be any cheaper and also consider the tub's metal be somewhat in a weakened state. Just start with another clean tub, you will enjoy the end result and costs much more.
|12-16-2013 09:56 PM|
|Easy_E||Looking at the pictures the damage could have been much worse. The biggest blow was to the hinge side of the tailgate. If he popped the top off and use a come along to pull on the top of that corner it would straighten up and maybe close good with a new tailgate. To be perfect it looks like theres a body line around the corner to change that panel ? Most guys put corner guards on to cover up this kinda damage. The top probably would be cheaper to replace.|
|12-16-2013 09:50 PM|
Sorry about that. I was a bit tired when I read this thread. Im all about keeping threads on track.
As far as the damage, I had to do something similar with my CJ years ago. I ended up buying corner armor and sucking the body back into shape via the corners and some heat.
|12-16-2013 09:42 PM|
Im curious to see how he makes out and hes had to put his thread back on track a time or two already so I was helpin a brotha out.
|12-16-2013 09:37 PM|
|12-16-2013 09:09 PM|
|srad600||Hes moved passed the winch choice for now, hes said it a few times. Hes asking how to go about getting his Jeep back on the road before he cars about a winch for a Jeep that isnt driving.|
|12-16-2013 08:01 PM|
If you ever have the opportunity to watch a Warn winch work you will realize you bought a inferior product. My wheeling partner has one of the better Warn models. I've had him winch me up a hill where my fronts were off the ground. He winched jeeps down a icy hill too slick to drive then winch his jeep down . The rewind unloaded is way faster , the controls are way better and shifts like is brand new although its about six years old.
I bought mine knowing everyone I wheel with had good winches but now feel like I'm three hundred dollars further away from what I needed.
In the gun business we call it buy once cry once.
|12-16-2013 06:46 PM|
|12-16-2013 06:45 PM|
|JeepersDave||If I were in your position, I'd take the gate and attaching hardware off, and find a non dealer sponsored body shop, the guy down the street type of shop and see what they would charge to pull the tub square (if it needs it) and to pull out the corner. It's not difficult to do, based on what I could see in your photos, it's all labor time. Shouldn't take more than 3-4 tugs to get it pulled straight and looking right.|
|12-16-2013 08:38 AM|
|CivilTJ||I know I'm going to catch a lot of grief on this, but Harbor Freight has a very good winch lineup. They hired some engineers from Mile Marker winch to design their Badlands winch series. A 9000 lb winch will run you about 299. The series got a great write up in 4 Wheel magazine about a year ago.|
|12-16-2013 05:18 AM|
I hate to do this but this is my probably most subscribed thread and I just hoping if someone could give me some advice on what they would reccomend I do.jeep damge - Imgur
Also i noticed some damage on the driver's side. It seemed to push the little metal tab the tail gate rests on away from the bottom piece and also the passanger side tub along the passanger door has some nice bends... Maybe some pulling could pop those out.
|12-01-2013 08:10 PM|
|12-01-2013 07:40 PM|
|kmrtnsn||I'm curious about this particular winch failure as the 10K size is the most recommended winch size in these parts for JKs and JKUs. What was the angle of the slope? Was the winch pulling on its own power. with no drive train assist (someone inside, vehicle in 4L, in drive giving it gas)? Was the ground dry, wet, muddy, or rocky? Were you using a snatch block, or two? Steel cable or nylon line? How much line was run out? Did the clutch fail, motor burn out? Kinda looking for the situational details to make sense of the failure.|
|12-01-2013 07:28 PM|
|tearin_dirtup||More news I was able to remove the tailgate and hinges spare tire carrier etc to have an open back now and I noticed the floor was also bent up.... Would it be possible to get someone to weld in a new floor and side instead of a whole tub swap?|
|This thread has more than 30 replies. Click here to review the whole thread.|