|11-25-2010 06:26 PM|
alright i see.. thanks for the tips.
Bed Liner Paint
|11-23-2010 07:40 PM|
|Elevated Offroad||When i had my factory bumper i used the spray can bedliner on it it chipped away so i sanded it all off and did the roll with the texture looked great till someone must of backed in to me it was all cracked like puzzle pieces and flaking off. I say if your going to spend more money on them get them powder coated or Line X them save your self the headache of this happening again.|
|11-23-2010 05:45 PM|
Bed Liner Paint
|11-22-2010 10:39 PM|
|11-19-2010 10:40 PM|
|sullivan8||thank you for sharing a picture for all of us to see.. any updates on this? i have also had some experience with bed liner paint before which i bought to protect paint from rubbing off and i can say that it served its purpose.|
|06-07-2010 10:31 AM|
|sevenservices||metal to shiny x2, rough it up really good. Maybe with a power sander... and yeah, you'll want primer in-between the metal and the paint. ...it helps the paint to stick|
|06-07-2010 10:07 AM|
|mrcarcrazy||You def. want to prime bare metal before applying anything...if you want it to stick.|
|06-06-2010 07:31 PM|
yeah, i'll do that, hopefully it will be done before september... lol
my wife is due in less than 2 weeks, so i'm not going to have to much free time for a while.
|06-06-2010 07:15 PM|
|cavediverjc||You're going to want to scuff the hell out of them. Also, remember, self-etching primer is going to be your best friend if you want your paint to stick. You can get self-etching primer at any auto parts store. It's all about the prep. Make sure you post some pics once you have them re-painted and installed.|
|06-06-2010 03:47 PM|
|Loic||so the surface was too smooth?... for sure it was not greasy, the sliders were brand new and very clean. but i guess I sand then to a to fine sand paper.|
|06-06-2010 02:23 PM|
Yeah, something definitely went wrong in the prepping process... I'd agree with the above that you probably didn't rough things up enough. I would recommend roughing them up good with sandpaper, applying a coat or two of self-etching primer, and THEN spraying the bedliner on them.
I used cheap Walmart spray on bedliner on my atv racks before I sold it and even it held up better than that...lol
|06-06-2010 02:10 PM|
I'd use heavy duty scotch-brite or really coarse sand paper. possibly some self etching primer as well. thats what i used when i painted my wheels and its works really well for over a year.
Also, try a degreaser like Simple Green to clean it off. A lot of grease will accumulate through the years and you cant really see it.
|06-06-2010 01:45 PM|
|cavediverjc||They still look pretty shiny. You really need to scuff them up for the paint to adhere properly.|
|06-06-2010 01:05 PM|
|Loic||I sand them properly, dust them with rag, I also use brake cleaner and then dust again with clean towel.|
|06-06-2010 12:54 PM|
|InfernoGirl||What did you clean them with?|
|06-06-2010 12:46 PM|
|andrew2456||I used the roll on type and had good luck. It's a little costy 100$ a can but worth it.|
|06-06-2010 12:33 PM|
bed liner paint...grrrrrrrr....
a while back I received my rock slider, bare metal, I clean and sand them very nicely, buy 3 cans fo bed liner spray paint, apply it following the direction on the can. I still haven't mounted the sliders... today I was doing stuff in the garage and bump into one of the slider that was resting on a cardbox a few inches from the floor. the slider hit the floor , I'm thinking no big deal, I picked it up and see a big chip of paint was gone... I looked closer and I see that I can peel the paint away I took a small screw driver and here the result... 'I got the paint from Checker auto but dont remember the brand. I'll try and go back to see which one it was as they had 2 brand .