|06-20-2010 12:09 PM|
|jayc||That came out good. that was just the spray on bed liner?|
|06-20-2010 04:08 AM|
|dkswift||That does look really nice.|
|06-20-2010 01:41 AM|
|philliprose25||I just finished the project, take a look at my profile pics. Used the recomended Rustoleum Truck Bed Liner Spray. Looks fantastic. Thanks for everyones help!|
|06-15-2010 11:30 AM|
|06-15-2010 11:26 AM|
I am glad you posted this thread as I am planning on doing the same thing this week/next.
You do not need to sand down to bare metal, do you? What grit sand paper?
|06-15-2010 10:59 AM|
|T-BONE N BIXBY||
It's in a taller can than normal spray paint and it sprays EXTREMELY SMOOTH.
My front grill and headlight beezles are painted with it and it has stood up to all rocks that have been thrown at it. (been about 1 1/2 yrs) The paint hasn't really faded at all, but since it's such a simple job, I plan on putting another coat on it soon. I just masked off around the fenders, and stuck some cardboard in front of the radiator.
Also, I recently replaced my old, broken tailgate and purchased a used one that was more structurally sound. I plan on painting it with the truck bed liner paint as well.
My jeep is dark blue, with a black grill and black tailgate. (can't really see the tailgate because the spare tire covers most of it)
|06-15-2010 10:37 AM|
|SurfNaked2010||i got my herculiner at walmart im doing my tube fenders right now. they had rust and chipping powdercoat on them so i just took em to a place to sand blast everything $100 bucks is fine for me got em used for reallllll cheap. than ill just coat em with herculiner.|
|06-15-2010 10:30 AM|
|philliprose25||where can i buy truck bedliner at? Home Depot?|
|06-15-2010 12:40 AM|
|wasurfer86||if i were you id use truck bed liner instead of paint of powder coat.|
|06-15-2010 12:33 AM|
|dkswift||Seems like every time I get hammered something ends up being painted flat black lol|
|06-15-2010 12:32 AM|
|philliprose25||So use those instructions and THEN sand. Guess I'll use the same steps to clean it again after sanding. Thanks!|
|06-14-2010 11:18 PM|
|drivebytruckerz||Before sanding: scrub with a brush and use water and Comet instead of soap... This will get any "anti-paint" stuff like stray armorall, oil, fluids and the like off and keep it from being sanded into the metal, which would repel paint and make it bubble up. A tip my dad taught me. He used to run the body shop at a Ford dealer.|
|06-14-2010 11:13 PM|
Need help on painting bumpers and running boards.
I want to paint both my front and rear bumpers as well as my running boards. All parts are the "tube" kind and all are currently chrome. I'd like them all powder coated black but I don't know who could do that around me (Westminster, MD) so I am gonna go with either a flat black or a hammered finish. MY plan so far is:
1. Remove all pieces
2. Sand down to metal
3. Clean all pieces to remove dust and dirt.
4. Apply 2 light coats of primer with light sanding in-between
5. Apply 4 coats of flat black or hammered finish paint
Any advice would be appreciated and I will definitely post a "how to" with pics when the project is complete. Thanks in advance.