|06-21-2010 08:05 AM|
|MikeyD||Not to worry - problem solved! I found where they came off - the sensor between the engine and gearbox.|
|06-21-2010 04:35 AM|
Wrangler Sahara engine wiring problem.
Hi guys, new here so please be patient and apologies as this is bound to have been posted to the wrong section - thanks in advance if you move it moderator!
Ok, I have a 1995 Wrangler Sahara and I have just removed the manifold etc to get the exhaust welded/repaired. After putting it back together it will not start.
On inpection I have found a wire that looks to have been sheered off. It is at the far end of the manifold and has three wires in one and looks much like a 3 wire version of a speaker wire. It seems to match exactly to a wire that comes out of the middle of the coil on the other side of the engine. I assumed it had come away from within one of the large wire bundles and have stripped the covers off them to no avail - I simply can't find where these wires were connected to and wondered if anyone can help me please?