|06-26-2010 12:18 PM|
|Sandhara||So much for an easy fix. All the fuses check out fine.|
|06-26-2010 11:36 AM|
i only checked a couple fuzes cuz it was late and i was ticked (this was last nites project), so now ill go check more of em, however i didnt have to move any wires and its just 2 connectors that plug into the back of the switch and i tripple checked that those were pluged in completely/correctly. I also think im going to pick up a new switch from advanced and see if that fixes it. i hate electrical problems........
thanks for the ideas so far
|06-26-2010 11:17 AM|
|philliprose25||I agree with the blown fuse concept. Also, double check to make sure that you re-connected any and all wires that you moved to put the new switch in.|
|06-26-2010 11:07 AM|
|ThunderFoot||Is it possible you popped a fuse in the process?|
|06-26-2010 10:45 AM|
replaced blinker/combination switch, now headlighs dont work.
I replaced the blinker/hazard/high beam switch on my jeep and now my darn head lights dont work, everything else works just fine but my darn headlights dont come on. I also tried putting my old switch (which worked ok before) back in and the head lights still dont work. Any ideas on what it could be? Any assistance would be greatly appreciated.