|06-26-2010 03:48 PM|
|OklaTJ||Thanks Jerry I guess I'm a cheap skate looking for a cheap (but good) way to lift! But I don't want to do something stupid that is why I asked sorry if it seams like I ask to many crazy things! I never wanted to go with a body lift at all but it was cheap lol I'll just have to wait like everyone else! lol|
|06-26-2010 03:39 PM|
The OE antiswaybar links can break but replacing them with a quick disconnect antiswaybar link like from JKS will stop that from happening in the future.
So far as your lift questions go, do NOT install a 3" body lift. A 1" body lift is fine, a 2" is ok if absolutely needed. There is never a reason you should install a 3" body lift, they create way too many problems and they look like crap too. Problems that happen with a 3" body lift that have to be resolved? Transmission shifter angle issues, transfer case shifter angle issues, fuel line length issues, steering wheel shaft angle issue, brake line length issue, etc.
It is FAR better to install a 3" suspension lift with a possibly a 1" body lift if you want some lift.
You won't find an experienced Jeep builder that will recommend a 3" body lift for a Wrangler.
|06-26-2010 03:38 PM|
And yes they make 33's x 12.5 or 10.5's (or it might be even 10's)
|06-26-2010 03:36 PM|
|doclouie||I think you mean a 3" suspension lift not a body lift. As for the sway bar link yep they break all the time. Go for a JKS disconnect system. They are a bit pricey, but will never brake. I picked mine up on ebay for $90 almost brand new. Not sure on the tires as I run 31s.|
|06-26-2010 03:26 PM|
Two part question
First I went to the lake on the beach. It was great!Then there we went through some dry mud holes. It was real fun stuff, good flexing for a beginner, lol. Now to the question I busted the drivers side Link,sway bar its a cheap 20 dollar part through quadratec no problem, do they normally break easy? Now for the next question I'm looking at a Rugged Ridge 3'' body Lift and then a 2'' Skyjacker with Hydro shocks,now can or should I run 33x12.50 15's with that combo? If not the 12.50 then do they make a 33x10.50 15?