|12-11-2013 12:19 PM|
|michiganadam||Omix-Ada Multi-Function Switch | Jeep Parts and Accessories | Quadratec $60 sorry. You also have to add a wiring harness under the tipm and get it flashed by a dealer. Jeepsareus.com has the entire fog light kit with everything and instructions for 130 or so. Sell the light housings on ebay or something.|
|12-10-2013 09:56 PM|
|scott m 72|
|12-10-2013 08:32 AM|
|12-09-2013 10:58 PM|
|Tweak||previous owner probably just got a newer bumper that someone took off and threw it on, are the fogs even hooked up to anything?|
|12-09-2013 10:14 PM|
|12-09-2013 09:25 PM|
|scott m 72||My 07 X has stock fog lights. The left stalk pulls out and they work fine - except when you signal for a right turn, which turns them off until the signal switches off.|
|12-09-2013 09:19 PM|
|12-09-2013 08:28 PM|
Both can be stock. Register on moparownersconnect.com and enter your vin itll show you everything the jeep came with....
Mine didnt come with fogs but i got the mopar kit and installed them myself. Complete with stalk. Previous owner may have put them on just for looks or hooked to a different switch somewhere, or it may have the wrong stalk.
Check where the wiring from the lights go.
|12-09-2013 08:15 PM|
|JKsJJ2008||Thank you. I googled the image of both stalks and it looks like I have the one that does not have the fog light with arrow pointing to pull out. Do you know if this was stock with 2008 wranglers or if the previous owner replaced the stalk and used one without the fog light function?|
|12-09-2013 07:41 PM|
|daggo66||Also its only the end that pulls out. Its a section less than an inch long.|
|12-09-2013 07:35 PM|
|michiganadam||Itll clearly have a mark that its made to pull out and itll only pull out with the parking lights or headlights on....|
|12-09-2013 07:22 PM|
Fog Lights Multifunction Stalk will not pull out
I recently bought a used 2008 Jeep Wrangler X (woohoo!) which is equipped with the front fog lights. However, I'm having trouble pulling out the multifunction stalk to turn on the fog lights. All other lights; parking, low beams, high beams, interior turn signals, etc are working, I just can't pull the darn thing out! Has anyone had this same issue? Being a used vehicle I suppose it's possible the previous owner may have replaced the stalk with one that is not intended to be used with fog lights, could that be the case? Thanks for the help!