|04-14-2007 03:17 AM|
|04-14-2007 01:50 AM|
|Triple88a||i love how DPA is discused at least once a week here|
|04-14-2007 01:44 AM|
|jherrin215||Looks Great!! Nice Ride!!|
|04-14-2007 12:13 AM|
|jeeperx2||Im not on here looking for any type of argument just knowledge!! so my junk (MRC phrase) works. i didnt discount anyones input! enough BS heres the finished product[IMG]|
|04-11-2007 11:36 AM|
Keep the advice coming and see you on the trails.
|04-11-2007 11:10 AM|
while I tend to agree that what is good for some isn't good for others. And what works works. I do believe, however, that there are certain principles about steering geometry that always bow to truth. Cause in the end everything bows to truth. And the fact of the matter is when your suspension articulates the track bar and drag link need to move in the same plane. Installing a dropped pitman arm without moving the track bar moves the geometry of your steering.
Manufacturers don't always get it right. Rarely does one manufacturer cover every single aspect with stellar precision. I'd be interested to know which manufacturer told you to install it. I'd also be interested for myself and others to call them and see exactly why they say you should install it and why it is needed for proper steering geometry.
|04-11-2007 02:18 AM|
|Sandman6160||I'm going to have to say that what works for some may not work for others. I think I started the last string and I just did what the manufacturer told me to do. The forum is great, but there were too many arguments. I installed a 4 inch lift, DPA, and an ajustable track bar. Everything works well. I have no problems at all. As long as you replace the OEM steering stabilizer and have a good alignment done, the jeep should run fine...again, what works for some may not work for others.|
|04-03-2007 05:30 PM|
Sorry you are taking so much hell for making that statement as I know you were saying it to me personally and not to the rest of the group that asks the questions.
Relax people. Ask away.
|04-03-2007 02:50 PM|
(by the way, I think everyone has the possibility of snapping at one point or another, it's how they do it that's interesting)
And don't mind MRC, JeeperX2, he likes to be blunt as much as I like to make fun.
|04-03-2007 02:12 PM|
I am here to help people. Your question was reasonable. That's why I took the time to give you some suggestions. In the end you need to make up your own mind so you don't point the finger at me when something goes wrong.
I don't look down upon people because they don't know. There is still so much I have to learn. I was in newbie shoes before and now I try my best to give back and if you don't like the way I give advice you obviously don't have to read it
|04-03-2007 01:53 PM|
|jeeperx2||Correct me if i am wrong but isnt this forum to gain knowledge and information? and not to be looked at as if you know very little because you ask a question that seems resonable? personally i think the above statement is rude!|
|04-03-2007 01:23 PM|
[QUOTE=jeeperx2;68156]But usually those of us that can spot the pinion angle by sight don't usually ask questions about dropped pitman arms.
|04-03-2007 01:14 PM|
But usually those of us that can spot the pinion angle by sight don't usually ask questions about dropped pitman arms.
|04-03-2007 11:41 AM|
Dang. That wasn't even an insult. It is a fact. Spotting your entire front suspension geometry by sight is something that takes lots of practice and feel. Not something you just jump right into. Getting the print out from a reliable alignment shop is THE best way to figure out exactly where your front end is setup.
I said it myself that I've adjusted my wifes junk 3 times already. I can't even spot the caster angle by sight. I gotta drive it and feel for myself.
|04-03-2007 11:27 AM|
I'm telling you, high power rifle, clock tower.
"You, what were you thinking? Drop pitman?" Ping.
"Did you really think that sticker would help?" Ping.
"Rusty's?" Ping Ping........ Ping.
|04-03-2007 11:05 AM|
Can we all feel the love?
|04-03-2007 10:39 AM|
High dollar? Now mind you this was a loooong time ago right after I finished stretching my junk and I took it to an alignment shop for a print out. It was 56 bucks and I was in and out in 30 minutes. That was the only time I've paid for an alignment on my jeep. The rest is done with my trusty tape measure in the drive way.
Caster is different for me. I have adjusted the caster 3 times on Anya's jeep and I'm doing the final today. I play it by feel and what the pinion looks like. But usually those of us that can spot the pinion angle by sight don't usually ask questions about dropped pitman arms.
|04-03-2007 01:28 AM|
The easiest way to make sure that your front will be okay in the garage is just to eye ball it to where the front pinion is just a hair above parallel to the ground.
I know I know Clifford, with the high dollar alignment printouts we can tell Caster for sure, but I think it's a waste of money and I haven't seen one wrong yet.
|04-03-2007 12:06 AM|
|jeeperx2||OK Thanks alot for all the quick info|
|04-03-2007 12:02 AM|
if you don't do the alignment yourself go to some place with a computer print out. Get the print out so I can see it.
You need to shoot for 5-6 degrees of caster
|04-02-2007 11:59 PM|
|jeeperx2||not done with sye yet just trying to head off any trouble when it finally leaves the garage|
|04-02-2007 11:52 PM|
The front is easier to deal with than the rear. In the front you have more to deal with besides the pinion angle. You need to have a happy medium between pinion angle and caster angle. Caster is what helps your jeep track straight down the road. Too much caster and your front drive shaft will vibe. Too little and you won't have decent steering characteristics. I would lean more towards something else being wrong if you have a steering wheel vibe. There is a wide range of play in the front before caster settings will give you vibrations.
Have you had your jeep aligned since you installed the lift?
|04-02-2007 11:46 PM|
|jeeperx2||Clifford any quick links on setting up drive shaft angles mainly the front end to potentially eliminate any wobble?|
|04-02-2007 11:42 PM|
|04-02-2007 11:38 PM|
oh wait! scout actually wheeled his jeep recently
|04-02-2007 11:38 PM|
|jeeperx2||thanks for the link C clears it up!|
|04-02-2007 11:36 PM|
|04-02-2007 11:36 PM|
|jeeperx2||no pics just yet not quite done with sye i'll post some when i get done didnt want to post just garage shots?!|
|04-02-2007 11:33 PM|
|mrbigjeep||i say listen to clifford. he knows what hes talkin about.|
|04-02-2007 11:32 PM|
|This thread has more than 30 replies. Click here to review the whole thread.|