|01-15-2006 09:25 PM|
|memsimba||yes the bower works ---- Thanks for the tip I will check tommorrow|
|01-15-2006 06:01 PM|
|Hunter9||Crawl under the drivers side dash and look to the right of the skinny pedal. You will see a couple of vacuum pull offs for the blend doors. Have someone move the vent switch from floor to vent to defrost and see if all actuators are moving. Then make sure the blend doors are not broken (common problem on TJs). Mine will not switch to defrost currently and there is a fix where you run a small screw through the end of the blend door arm to make it work. HTH|
|01-15-2006 11:02 AM|
Does the fan blow?
I'm not sure, but I think the duct positions switch by vacuum lines that are connected to a diaphragm on a lever inside the dash.
I have a YJ, so I know I can't be much help to you.
|01-15-2006 09:01 AM|
|memsimba||the thing is that I am not gett heat from the floor and no defrost for the wind when i used too.|
|01-15-2006 12:35 AM|
|amerijeep||My YJ only blows from the defrost and the floor. The vents are for fresh air. The fan doesn't blow through them.|
|01-14-2006 11:03 PM|
Recently my jeep has not been blowing the heat where I set the vent to no matter what it is blowing heat from the 2 dashboard vents closet to the windows even if I set it to blow on the floor... has any one experience this before