|07-24-2010 04:17 PM|
|james haney||i think that will be my next move thanks for everyones help....james.|
|07-24-2010 01:55 AM|
Time For Experts?
I have a friend that went through this *exact* situation last month. We finally gave up chasing signals with the Volt Meter, and put the Jeep into the shop.
It took them 30 minutes to fix the problem. I'm not a big fan of going to "The Shop" when I can't figure out the problem, but they fixed the issue and had the Jeep back on the road after a cup of coffee for around $55.00 bucks.
|07-23-2010 01:50 PM|
|james haney||ok i'll give it a try thanks.....james.|
|07-23-2010 09:28 AM|
|RamJeep||James I had an issue with my front signals where they wouldn't work but every so often. I found that when I would mess with the plug on the brake light switch they would work fine. I don't know if it runs through it or if it was a ground issue. The switch is on the brake pedal up by where the rod connects to it.|
|07-23-2010 09:20 AM|
|james haney||well i stoped bought bulbs and still same thing front blinkers both come on no matter which side is selected rear works correct any other suggestions would be appreacated...........james.|
|07-23-2010 01:34 AM|
|james haney||i have'nt but i will try that in morning when i get off thanks so much for your help.....james.|
|07-22-2010 10:37 PM|
Did you change the bulbs?
I'm not trying to be "snarkey" with the obvious.
Those lights run a 5170 bulb? Half the filament is burnt out?
|07-22-2010 09:54 PM|
turn signal problem
hello everyone ,i am new to jeep life i have a 1992 wrangler that i bought a month ago and turn signals worked fine then a couple days ago they started messing up when right signal is on it works fine in back but up front both come on and flash and same with left back works right front both come on and the indicator flashes both i replaced flashers and checked fuses have no ideal what else to check thanks for any and all help.......james.