|07-28-2010 01:59 AM|
|convict27||Thank you Sonofabeach and Dirt! That was exactly what I was looking for. Now it is time to get cutting!|
|07-27-2010 11:01 PM|
I marked mine with a set of calipers 1.5" above the stock lip. Then I cut it with a razor knife, bent the cut part backwards and snapped the lower part off, much like scoring and cutting drywall.
The finish is very clean.
35" tires on 2.5" lift with ACOS at 3/4"
|07-27-2010 10:47 PM|
I marked mine with masking tape, hit 'em with a jig saw and smoothed 'em out with a file
|07-27-2010 09:58 PM|
|InfernoGirl||No problem, I'm slow every night, and morning, and lots of afternoons too!|
|07-27-2010 09:16 PM|
|GoldTJ||NM,InfernoGirl-I just clicked on your link-I get it now(been a long ,hard day,and I'm slow tonight!)|
|07-27-2010 09:11 PM|
|InfernoGirl||Thank you on both accounts, I make the seat covers... Dirty Mudder is me. You can find out more by clicking the links in my sig...|
|07-27-2010 09:10 PM|
|GoldTJ||Not to stray off subject too much,but where did you get the cool seat covers,InfernoGirl?BTW,the flares look cool!|
|07-27-2010 09:04 PM|
Nothing flare specific, but here's what I have....
I didn't trim but about 3/4" since I didn't want them flatter... Obviously yours will look different if you take off more.
|07-27-2010 08:57 PM|
|jwm1986||She's got it down I think! I have seen in person and they turned out very nice. I did mine with a die grinder and paddle wheel. It took forever and made a mess.|
|07-27-2010 08:52 PM|
|convict27||Thanks IG! I second CRU9's request. I would love to see how they come out.|
|07-27-2010 08:28 PM|
|cru9||Does anybody have any pictures of their cut flares? For a TJ|
|07-27-2010 08:09 PM|
|InfernoGirl||We do it all the time. Nothing to it. The easiest way (trust me, I tried about 6 other ways before I found this one) is to get a nice sharp razor knife and score it where you want them trimmed, maybe a hair less than you want to end up. Then just bend it in, and peel it off. It seems hard to cut, but once you score it and bend it, it will peel like a banana... I tried a Dremel, and it gets too hot and throws lava balls at you... not fun, and a coping saw and all sorts of other things after I first tried the knife.. Went back to the knife and kicked myself for months for not trusting what I'd read.... It really is the easiest way. Mark it first with a jig, or something, and have at 'em..|
|07-27-2010 07:21 PM|
Chopping stock fender flares
Well as some of you might know, I am over in the land of the rising sun and some items I just cant get shipped to me due to weight and size restrictions of sending things through the USPS only. I was wondering if anyone has taken their stock fender flares and chopped them to make them into flat fender flares? If so what did you use for the cutting and how did it come out? Do you all think it would be a bad idea or not? Thanks!