|08-18-2010 02:11 PM|
|Jetskifreak82||Yes! My brother in law washed my jeep one day, five hours later it was still dripping so I did this and about a cup of rusty water fell out! No more drips now.|
|08-18-2010 01:47 PM|
|sahara89||this really makes that much of a difference?|
|08-18-2010 01:42 PM|
|ddbowdoin||how deep do you drill in, did you use tape to measure off your depth with your drill?|
|08-07-2010 11:20 AM|
|Ir8divr||I was just going to post that question....... Thanks guys|
|08-07-2010 11:00 AM|
|08-07-2010 10:42 AM|
Here's a pic of the leaky mirrors. The colors are weird and its a cell phone pic, but you can see where the water has been running
|08-07-2010 10:22 AM|
|08-06-2010 10:45 PM|
|SardonicPadre||Would my 2007 X have this problem?|
|08-06-2010 07:41 PM|
|d3digit||I did 2 holes The problem was solve. No more leaks|
|08-06-2010 07:35 PM|
|d3digit||I did already a few weeks ago it works great. there was a lot of water inside|
|08-06-2010 07:15 PM|
|Echo||Let us know how it turned out.|
|08-06-2010 06:02 PM|
|scottwmckenna||I found a post that talked about this, and showed a picture. I went ahead and drilled my holes today, hopefully this fixes the leaking door problem. Thanks so much, I appreciate you guys posting all the helpful information.|
|08-06-2010 12:06 PM|
If you look behind the glass mirror, you will see a giant factory made hole in the upper housing already, water is entering there and settling down at the bottom of the mirror mount. That is what has to be drained.
|08-06-2010 11:31 AM|
Thanx gdub-but I don't do writeups and the internal mods are obvious !!
|08-06-2010 11:23 AM|
I am fine with the drill work - although it seems there are a couple places to drill it being given - I prefer the hole under the arm vs. the base myself. But if there is something that is out of sight out of mind - would be interested in that possibly as well...
BTW - that's one slick rig you have jBox...
|08-06-2010 11:02 AM|
I used to have a ford ranger that would get moisture in the headlight and blow the bulbs.. I drilled a hole near the bottom and they would drain.. anyways..
Jeep needs to address this.
|08-06-2010 10:24 AM|
Sorry I can't get a pic, cause I'm not with my jeep and
I didn't doit to mine, don't need to, the jeep is garaged and I've modified the mirror internally--no pics
|08-06-2010 10:08 AM|
This is interesting that you post this. I have the same issue obviously with my 2010 Unlimited, and it bothers me in a major way. Would you possibly be so kind and post a picture of what you did and where you drilled? I'd like to do this to my Jeep.
Thanks so much!
|08-06-2010 09:12 AM|
Thanx Echo, it does seem stupid that JEEP would outfit their jeeps like this !
I've never heard of any other auto mfg's mirror behaving like this, so we just have to bite the bullet and do this simple mod--no biggee and
I sure didn't invent this mod, I just heard about it before I got my JKU !!
|08-05-2010 11:55 PM|
Not to belabor the point, but every time I washed my 2010 Jeep Unlimited it would drip water from the mirrors for hours. It's not the streak of water on the front doors that bothered me, it was the knowledge that a pool of water submerging the mounting bracket, bolts, and body of the that area was not a good thing for my Jeep. I knew that eventually it was going to rust in an area I couldn't see. So I listened to a "Jimbox" suggestion on this forum that suggested that I drill a 1/8" hole on the underside of the mirror housing where it was attached to the door. Actually, since it can't be seen anyhow, I drilled a 3/8" hole. The test was when I washed my Jeep today, even though the car wash uses an air compressor/hose to help them dry the cars, my Jeep didn't have one drop of water left over to leak out of the mirror housing.
I bring this simple but important fix up because anyone that notices water streaming down their front doors from the bottom of the mirrors across their front hinges after a wash should be aware of why it's happening, and what it could cause. It is a design flaw, Jeep should have a drain hole in the mirror housing to prevent potential rust. The hole behind the glass mirror is over 1" in diameter and Jeep provided no way for the water entering that hole to escape. "Jimbox" gave me the solution. Common sense solutions found here, this forum rocks.