|02-06-2011 11:56 PM|
|08-09-2010 02:03 PM|
|08-09-2010 02:06 AM|
If you or a friend can weld, this would be a good way to go. You can get the angle iron at lowes, as well as the hardware. Depending on fabrication experience it cold probly be done in an hour or so. If you would like a parts list let me know. Think my cost was about $15.00. Atleast it's out of the way of the hills. Also lets you mount the biggest highlift. No it doesn't obstruct the view.
|08-08-2010 08:34 PM|
|Green Bay TJ||If I am running a stock TJ with 31" tires (or possibly 32s with a 2" lift if I decide to do this) am I better off using a hi-lift jack, or just stick with the jack that came with the jeep? I am still consider buying the Hi-Lift for its utility as a come-along. By the way, where is the jacking point for a hi-lift? Bumper?|
|07-31-2010 07:29 PM|
I'm also cheap so... Total cost $3.50! So much for high dollar mounts.
No worries about mud or the family smacking their heads on it!
|06-15-2010 11:36 AM|
and i do not have the bills to buy a winch, even if i had one it would not have worked because my front bumper was up against a tree, the jeep had to get pulled out from the back.
im gonna get the winch and its off road accessories kit, it will get me out of these situations.
|06-15-2010 12:20 AM|
A winch would have pulled you off the log as well..........just saying......
I'm not saying that HiLifts are useless. I'm just saying that they're mostly dead weight.
|06-15-2010 12:18 AM|
|06-14-2010 11:48 PM|
|drivebytruckerz||I've used mine before. It's the only jack I have in my Jeep. Properly equipped you can use it for lots of things. I've got mine mounted to the back bumper.|
|06-14-2010 11:37 PM|
|06-14-2010 01:47 PM|
Real quick question.......how many of you ACTUALLY use your Hi-Lift? I've got one, but it now sees most of its time in the garage. For me to use mine, I have to limit my suspension travel with ratchet straps. Pain in the ass. Otherwise my suspension flexes too much to even pick a tire up off the ground to change it. I just use a bottle jack. Worked for 100% of the times that I needed it, both off road and on. I think Hi-Lifts may have their uses, but they don't outweigh the negatives. My $.02
Also, I admire your ingenuity and your cheapness (I'm Scottish, so I know ALL ABOUT being cheap!! )..........However, those straps look like they'll succumb to gravity after a bit, especially when offroading with some big bumps. Just a heads-up.
|06-14-2010 10:43 AM|
|04-04-2010 03:21 PM|
|yjkid95||what about mounting one on the back bumper ive been thinking of taking the hoops of the back and mounting a hi-lift on the back with a cover so it wont get to grimey.|
|03-30-2010 08:06 PM|
|oldman||nice work i mounted mine on my winch plate. ill post some pics.|
|03-25-2010 12:29 AM|
|terrible2||I personally wouldnt mount it to the front of my bumper, even with the sleeve housing that thing will get caked in mud.|
|03-24-2010 11:25 PM|
|bmaan123||I'm not to worried about it getting damaged i've been stuck in a mud hole up to it and had to dig it out already and she still works fine. I just took it home sprayed it off and wd-40'd it. I don't like having it mounted inside because once it's dripping in mud not a lot of people are gonna want it hanging behind there heads haha|
|03-24-2010 08:42 PM|
|H2 Recovery Team||
Also with my jeep I planned on lifting it and all. Want to put. 33 bf goodrich all terrain and probably a 3 inch suspension lift. What kind of lift should I get and how much would it cost. Don't want to spend a lot but want a nice one. Also want a light bar for the top of window and. Lights in the bottom corners of the window. Anyone have any ideas
|03-24-2010 01:38 PM|
my 2 cents
|03-24-2010 12:23 PM|
|03-24-2010 12:12 PM|
|snwchris||Yea lights are fine on the front bumper. It's just one of those things, that yea damage could occur. But then again if your wheeling... same thing damage could occur period|
|03-24-2010 11:53 AM|
|H2 Recovery Team||
lights on bumper
Do you not recommend putting lights on your front bumper? I just got my first wrangler two weeks ago and wanted to put lights on the bumper along with a winch. But do you think its a bad idea to put the lights on the bumper?
|03-24-2010 10:54 AM|
|shadowulf||Sorry, but it makes me cringe seeing a jack mounted out front on the bumper. I've seen too many lights and "grill toys" fubared on moderate trail rides.|
|03-24-2010 10:35 AM|
Not bad... only down point of the hi-lift being mounted on bumper is how dirty it will get when going thru mud holes or any wheeling. To keep it working when needed would have to make sure it's maintained while mounted outside of vehicle.
I mounted mine on the inside behind rear seat with a set of clamps for the roll cage.
|03-24-2010 01:21 AM|
Hi-lift bumper mount TJ
I modified a common cheap inside Hi-lift mount to work outside. All you need is basic tools, two 3" minis and a couple nuts and bolts.
first you bash them
then you tap them
then you mount them
I just herculined the tub so i will probably be painting them with that soon