|08-11-2010 12:07 PM|
|rd-wrangler||our AC system is taking the top off|
|08-10-2010 12:15 PM|
|08-10-2010 12:10 PM|
|08-10-2010 11:10 AM|
|saltwaterwop||You Non A/C people are strange..|
|08-10-2010 09:12 AM|
|08-10-2010 09:08 AM|
|NAVYCHIEF||the center "vent" is actually not a vent. it is only heater. the selector slide must be in the "heater" postion for any output. temp will be determined by the heat/cool slide. in the heat/defrost positions there will always be some flow. amount of flow is determined by the blower switch. the vent position only has flow to the square hole by the passengers feet. it in never powered by the blower. whew!!!!!!|
|08-10-2010 08:59 AM|
so your saying if i put heat on then the vent will work? but wont work if i just put cool on...
|08-10-2010 01:14 AM|
|08-10-2010 12:07 AM|
|NAVYCHIEF||what year jeep? what vents are you refering to? center heater vent? they are not powered in the vent position. heater and defrost only.|
|08-09-2010 03:33 PM|
|08-09-2010 03:21 PM|
|cliffhanger486||do they ever work?|
|08-09-2010 02:01 PM|
ok cool thanks a lot saltwater!
|08-09-2010 01:42 PM|
Check your engine compartment for any vacuum hoses to see if one came loose from the engine.
A Vacuum usually runs the vent switching operation.
If the vent switch work smoothly, likely a hose.
If the vent switch seems to be binding or too lose, it may also be a knob switch connection that is broken/loose behind the dash.
|08-09-2010 01:21 PM|
in cabin vent doesnt work
my in-cabin vent does not work at all. my defroster works just fine. nothing blows out of the vents at all. was just wondering if anyone has had this happen to them or heard of this and how to fix it...thanks