|08-23-2010 06:18 PM|
Grade 8 bolt, 1/2 x 2 1/2 national coarse hex head have a shear rating of 17 thousands pounds EACH bolt. The tow hook or the nut spot welded in the frame will fail before the bolt will.
The bolts they put with those hooks from autozone are grade 2.
But hey fill your boots !!
|08-23-2010 12:26 PM|
|Bobthegod||But the ones from Autozone for $9.99 ea. They are rated at 10,000 lbs. AND INCLUDE THE REGULAR BOLT.|
|08-22-2010 10:20 PM|
T-55 is the OEM tow hooks in the front.
Swap them out for 1/2 bolts ... better and safer than those POS
|08-12-2010 09:33 AM|
|08-11-2010 07:04 AM|
|Bobthegod||$9.99 at Auto Zone 10,000 lb rated AND they look just like the stock ones.|
|08-10-2010 03:40 PM|
|08-10-2010 03:36 PM|
|lwszabo||awesome! sears here i come!|
|08-10-2010 03:30 PM|
|Bobthegod||T60 for the bolts on the front tow hooks....get the Sears Craftsmen set so you get the T60 & T65 included....check eBay too.|
|08-10-2010 03:27 PM|
|KennewickGuy||T55 was the largest I could find and I think that was for my rear trackbar bolt on the axle end.|
|08-10-2010 03:22 PM|
Pretty sure it's a T55.
I'd go to a local auto parts store and buy a $20 set with an included ratchet. Most of them offer lifetime warranties. I bought one from NAPA and one of the torx sockets snapped, swung by the closest one and they swapped me for a new one no problems.
|08-10-2010 03:16 PM|
whats the largest torx bolt on a Wrangler
I am wanting to buy a Torx set, would a T55 be the biggest needed on a Wrangler? Quadratec offers a set from T20 to T55 for $25.00 I am thinking of getting a set to have just in case!