Jeep Wrangler Forum - Reply to Topic
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > TJ Jeep Wrangler Forum > TJ Tech Forum > Brake Problem (Only in Reverse) this cant be good!!

Join Wrangler Forum Today


Thread: Brake Problem (Only in Reverse) this cant be good!! Reply to Thread
Title:
  
Message:
Post Icons
You may choose an icon for your message from the following list:
 

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
08-19-2010 07:40 AM
RoSs ok, so now that im paying more attention to the front end of my jeep ive noticed that whenever i hit a pothole or washboard in the road i get the same sound from the front end that i do when i am in reverse hitting the brakes. CLUNK CLUNK!!! I am fairly sure the problem is control arm bushings. The calipers are very snug and so are the bolts. I have another thread with pictures of the control arms. If yall wouldnt mind hitting that one up to see if u can put a brand on my lift that the jeep came with. Are bushings brand specific??? The thread is called "control arm woes!!!"
08-19-2010 04:37 AM
Sticks Caliper bolt or even a pad that has come apart or lost a clip.
08-18-2010 08:21 PM
RoSs I checked for any play in the control arms and it all looked pretty solid. The only time this can be reproduced is if I get in the brakes hard. Regular stopping won't make it do that. I looked around behind the wheel to the back of the caliper and they both feel snug and look to be ok but I'm gonna pull the wheel to get a good all around look and so I can pull the bolts to check them out. Ill keep yall posted. Thanks for the help, guys like yall make the forum what it is.
08-18-2010 07:54 PM
Jerry Bransford Yep just two bolts per caliper. Make sure if you remove them not to tighten them too hard when you reinstall them, 13 ft-lbs is the spec. They only thread into aluminum which has been stripped out by more than one Jeeper using their 1/2" ratchet drive. If you don't have a torque wrench, just tighten them so they are good & snug using nothing bigger than a 3/8" drive ratchet wrench or a short box-end wrench.
08-18-2010 07:13 PM
RoSs I was looking at my control arm bushings the other day and they all seemed pretty solid. There wasn't any play in them when I was pulling on them but I will try that Jerry. And if there is a broken bolt in the caliper it should be pretty obvious right. There's just 4 that hold it on correct.
08-18-2010 06:02 PM
Jerry Bransford
Quote:
Originally Posted by lancetkenyon View Post
Could also be a missing or broken brake caliper bolt. The brake tries to grab and gets twisted up a little, grabbing hard. Going forward, it would not try to push out, just pull back into place. I am betting a top bolt, maybe passenger side?
Good suggestion, that sounds like a good place to start.
08-18-2010 05:26 PM
lancetkenyon Could also be a missing or broken brake caliper bolt. The brake tries to grab and gets twisted up a little, grabbing hard. Going forward, it would not try to push out, just pull back into place. I am betting a top bolt, maybe passenger side?
08-18-2010 05:21 PM
Jerry Bransford Probably a bad bushing, possibly in a control arm. Try watching the front-end and control arms for unwanted movement while a friend turns the steering wheel back & forth. The Jeep must be on the ground for this to work, don't jack it up for this test.
08-18-2010 05:16 PM
RoSs
Brake Problem (Only in Reverse) this cant be good!!

Ok this only happens when I'm backing up...... When im in reverse and hit the brakes I hear a loud "thud". You can feel it in the steering wheel and in the jeep its self. When this happens the steering wheel jerks to the right then goes back to where it was. I got my girl to get in the jeep and do this while I watched from in front of the jeep and when the brakes are hit it looks like the whole front axle housing shifts or kinda sucks up tight towards the belly of my jeep. Also when this happens the front tires jerk in very violently. Its like there is some kind of slack in the front end and when you hit the brakes it pulls the tires in and the axle housing up and tightens everything up. I've never seen ne thing like this. Thanks for any and all help.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -5. The time now is 10:04 AM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC