|08-28-2010 11:38 AM|
Open up the PDC (Power Distribution Center) access panel and using the layout diagram contained on the lid, find the Starter relay. Once you have found it, put your ear next to it and listen for a soft click inside the relay as a helper turns the ignition key to Start. If it doesn't click, odds are the relay itself is bad or the ignition switch is bad. You can swap that starter relay with one of several other similar size relays in the PDC, most are the same type relay. I think the horn relay is the same so can swap the relays between those two to see if that helps.
Or if the starter relay does click, that means either the wiring between it and the starter solenoid is bad, or the starter solenoid is bad. A test light can confirm whether the starter solenoid is getting voltage or not from the starter relay.
|08-28-2010 11:32 AM|
'98 WR sport Electrical Problem
3 days in the shop and this "electrical problem" still can't be found......(TJ 6-cyl). New battery and alternator. Not the starter; not the ignition (turn the key and lights/guages go on, but not a click or tick or sound). So what about computer codes??? Anything on a 98 Wrangler that could cause a short?