|09-02-2010 09:50 PM|
|FNjeep||Stop thinking about that now kenshinz.|
|09-02-2010 02:10 PM|
|Ibuildembig||Frame mounts are in different locations...so your gonna have to cut um off and reweld them. Ur also gonna have some wiring harness challenges....and you might have to change the t-case depending on what your input spline count is. Also, your tach's not gonna read right either.|
|09-02-2010 02:08 PM|
88 wrangler 4 to 6cyl swap
i just found an 88 wrangler on craigslist but the tranny is shot and its a 4cyl.
a friend of mine has a complete 258 6cyl drivetrain. what should i know before trying this swap? im unsure of the motor mount locations because i dont have the 88 in front of me.