|11-02-2014 07:03 PM|
|cRaZy888||What did you do about the heater controls?|
|10-05-2014 10:25 PM|
|rogerf1970||I like the stainless idea, i went with a custom CJ dash thats powder coated over the aluminum. I was afraid the aluminum would scratch easy, do you think it will be easy to scratch?|
|10-04-2014 09:31 PM|
|caraudiochef||I like it|
|10-04-2014 09:02 PM|
|10-04-2014 09:00 PM|
Here's mine, it's not complete yet...it's made out of fiberglass.
|10-04-2014 03:31 PM|
|Smarks24||Looks great, how thick is the aluminum that you used for the dash? Would be curious if and noise while driving and hit a bump or 5 from the dash itself. This has been an awesome read and inspiring project|
|10-04-2014 02:51 PM|
|Code3_jace||Wow... Im starting lean to a custom dash now that I've seen yours in the process. Strong work.|
|10-04-2014 07:13 AM|
Looks good. Seems that now I know you can do it, I have to at the least give it a try. I think this might be my winter project. Although I'm not sure about that since my Jeep is too tall to fit into the garage. But I can start on it.
I think I am going with 16ga steel for the dash panel. Should be strong enough to do the job. Maybe add some structural internal supports if needed.
|10-04-2014 12:06 AM|
Just wanted to give an update that the project was successful!
Rather than having the sheet CNC'd out (over $250), I cut it out myself from some aluminum. It looks fantastic! I could not be happier with the outcome.
Below are some pictures.
The gauges and indicator lights were fairly straight forward. Cut and splice. Although there was a LOT of trial and error to what wire actually did. I searched high and low for an accurate diagram, or people listing what each color did. I think Jeep picked their wire colors out of a magic hat.. Because every guide I found was a bust, and every one was different than the others.
Next on my agenda is to do the CJ defrosters in the YJ. I plan on doing this tomorrow (10.03.14). Ill post pictures as I progress through that!
I would be more than happy to answer any questions that arise! As this was a very fun and worthwhile project!
|08-15-2014 10:56 PM|
I had to rule out the Tuffy 6.5" Stereo console.. The width is still too wide between my seats - I wouldn't have been able to fit it if I tried. I put TJ seats in my YJ a while back (best decision ever) but the spacing between them is so tight. I could space them out towards the doors - but that's a whole project within it's self.
I sent out the final 2D sheet metal flat patterns to 6 companies around. I've heard back from 3/6 so far.
3: Not able - Min order is 100 units.......
4: Awaiting Response
5: Awaiting Response
6: Awaiting Response
Just as some final notes, I went with 1/8" Stainless Steel. I am looking to have a coarse brushed finish/texture to it. Attached below are the final renderings. I'm hoping to have a company begin cutting it out this coming week! Very exciting!
The 4 holes you see here are what I'll use to attach the under steering column piece. That way there aren't any visible attachment points on the front. Ill have piece of Plexiglas or metal that it will bolt to.
I'm ready to get this project over and done with! Its had to be drug out far too long! I just get antsy..
|07-21-2014 09:14 PM|
|JMO69||Awesome! All I've done is blue LEDs! I would like to see someone do one out of wood!|
|07-19-2014 05:05 PM|
|07-19-2014 04:17 PM|
|Smarks24||Amazing attention to detail|
|07-19-2014 12:20 PM|
|RawhideClab||Looks awesome man. This is one of my dream mods for down the road.|
|07-19-2014 01:09 AM|
Just wanted to give everyone the latest update:
THE PROJECT IS ALIVE AGAIN!
I received a Kenwood KMR555U Marine CD Receiver
Amazon.com : Kenwood KMR555U Marine CD Receiver : Vehicle Receivers : GPS & Navigation
An Auto Meter 4798 Carbon Fiber Electric In-Dash Tachometer
Amazon.com: Auto Meter 4798 Carbon Fiber Electric In-Dash Tachometer: Automotive
and the key element - Neiko 01407A Stanless Steel 6-Inch Digital Caliper
Amazon.com: Neiko 01407A Stanless Steel 6-Inch Digital Caliper with Extra-Large LCD Screen and Instant SAE-Metric Conversion: Home Improvement
I went ahead and stripped that nasty old dash off of the YJ today, it felt great making some good progress. I left the flat metal and stock guages on temporarily until the custom metal comes in! See Below.
Attached is the CAD for the dash, were a community that shares! I only ask that you don't make an EXACT copy, change something up so that no one has an identical dash!
I can't wait to see what everyone comes up with!
Below is the PDF CAD
I will give out the final draft when I have all the dimensions on! in an autocad format as well!
|06-11-2014 02:32 PM|
I would make it out of stainless.
If you make the design yourself, it would only cost about $200 for the material and the cutting. I have gotten a couple quotes over the phone. The real cost is in the design.
I am a recent college grad myself so I understand your woes but Plexiglas would fog up and look crappy down the road.
Sheet metal coated with good primer and paint would likely hold up a really long time too. I doubt the condensation would really attribute too much, as long as there is a way for water to drain out.
Would you be willing to share your cad files? I know how to draft, but lost my student licence when I graduated. I have a couple drafters at my company so they will help me adjust the gauges and switches so we don't have identical custom dashes. I may be able to float some cash over to help fund that stainless, too.
|05-31-2014 11:59 AM|
Still debating if I want to make the box out of plexiglass sheets, or if I want to create a flat sheet metal design and have it CNC'd out. I guess corrosion on the inside of the box (condensation) is my concern.
Any thoughts on this?
|05-27-2014 03:04 PM|
How are you going to route the AC and Heater through those vents in the dash?
It looks like the current vents under the dash are strait in front of the evaporator. Meaning, it looks like you will have to build some sort of custom box.
Also, what about the AC controls?
|05-22-2014 03:40 AM|
Looks like a good start to your dash, I always liked the looks of a CJ style flat dash more than the YJ setup. Would love to swap a complete CJ dash, heater controls and everything, then use Speed Huts new CJ series gauges in mine.
Looking forward to seeing more on this.
|04-07-2014 08:43 AM|
Here's a picture of my Double D Fab custom dash, before it was painted. This might give you some ideas.
|04-07-2014 03:28 AM|
|drphil23||cant wait to see the finishing dash!|
|04-02-2014 03:43 PM|
Sadly no.. nothing is new. College and a new apartment are draining me. Will have to hold off for a while - sorry all. Talk about an expensive project though! Whew! It wouldn't be as bad if I wasn't relying on my stereo being mounted in a $250 tuffy console, but so it goes, it is worth it. My goal is to not cut any corners on this project, to do it right the first time.
Here is the most current CAD I have.
If anyone has more ideas / things they are doing to their dash post it up here!
|03-31-2014 06:58 AM|
|03-19-2014 02:33 AM|
|dmaxthad||Now im following. The ones I was confused on were the vents.|
|03-18-2014 10:30 PM|
|03-18-2014 03:37 PM|
|03-18-2014 12:40 AM|
|03-18-2014 12:38 AM|
Since these are waterproof, that means they are at least from the front. So when I put mine in I'll seal them in so that no water can get in past the waterproof point at all.
If they still get destroyed, then I'm pretty sure Oznium has a warranty on their stuff. If worst comes to worst... It's a Jeep. Just empty every pocket
|03-17-2014 02:21 AM|
Not to rain on your really cool idea of placement for those switches...
But a poor choice for placement...a spilled beer or any moisture and they wont like where you put them. As well as just dirt and dust in general. Those aren't a sealed switch, just a push button. I know they say fully waterproof from the front, but that means mounted in vertical mounting.
I had similar switches in the front of my center console. They didn't last very long. Out of 4 2 got fried by a beer, 1 was ruined in a rain storm, and the last got dirt and dust impacted in it to the point where it didn't work anymore at all.
|03-16-2014 06:12 PM|
|dmaxthad||I cant tell which holes are for the indicators and the speakers but what are the other holes? I figured out which ones are the fuel, water, oil and voltage gauges.|
|This thread has more than 30 replies. Click here to review the whole thread.|