|09-13-2010 09:46 PM|
|TuckerTighe||I don't Have receivers on the wheel well... all i have is the seat, and the holes in the tub.|
|09-13-2010 09:40 PM|
It looks like a tumbler seat... I say visit ACE Hardware for mounting bolts... Grade 8 with flanged heads...don't remember the size.
The rear of the seat is another story...there should be a latch on either side of the seat, and then on the wheel wells there should be the receivers that the seat locks into...they keep the seat from tumbling forward.
I'm not a parts guy but I'm certain one of the gurus here will be able to give you are part number...although I don't know if it would even be available. Maybe try a junk yard?
I can send you a pic of what you need if it helps.
|09-13-2010 09:23 PM|
|TuckerTighe||The First Picture is what is in the front of the seat, on each side, theres only one hole in each of those things|
|09-13-2010 09:17 PM|
|Jeep Nurse||I can't tell from the pictures...does the seat have two mounting feet with two holes in each at the front?|
|09-13-2010 09:15 PM|
Rear Seat Question
Ok, So When I bought My Jeep the owner said that he didn't have the hardware for the rear seat. I thought that this seat was a bestop seat, but when i look at the installation guide for the bestop seats im sure it's not what I need. So now i think that it is just a stock seat with a Bestop Cover, Below are some pics, can someone tell me where to buy hardware for this particular seat?