|09-17-2010 05:17 PM|
Your auto trans 1st gear ratio is 2.84
Your transfer case ratio is 2.72
Your rear axle ratio is 3.73
Your crawl ratio is 28.81 (2.84 x 2.72 x 3.73)
An auto transmission has a lot of slip, so yes, even though your actual crawl ratio is 28.81, your effective crawl ratio really is lower because of the slip in the auto transmission.
|09-17-2010 04:49 PM|
My '08 JKU Rubi T-CASE (NV-241) OR Rock-Trac, has a crawl ratio of 73.1/1 all other jk's have 38.9/1
The Auto's are different in the Rubi with 4.10 axle ratio
When I'm in 4lo--there is "No Slippage" or give-
|09-17-2010 04:12 PM|
|aelwero||No clue on the ratio, but the getting away with a lower ratio is debatable, and I think it comes from the torque converter having a little "give" to it. (think stopping at a red light uphill... in an auto, on the right angle, you can let off the gas and just sit there... in a stick, "hovering" in the same manner without the brake would let the magic smoke out of your clutch.). I'm no expert, but that's the impression I get.|
|09-17-2010 02:02 PM|
Crawl Ratio with auto Transmission
What is the Crawl Ratio with the automatic Transmission?
My axle Ratio = 3.73
It is true, Automatics can get away with a numerically lower crawl ratio? Why?