|09-29-2010 07:44 AM|
I've been using a wash mitt on them, but not overly careful. This winter will be a good test. My bedlined and painted grill got it's first chip yesterday, but the wheels are good still. No visible scratches yet.
|09-28-2010 08:56 PM|
|09-28-2010 08:21 PM|
How have these been holding up for you? I'm concerned about the life and/or how easily they chip or scratch...
|09-28-2010 05:06 PM|
Allow an entire day, more if the weather is damp.
|09-28-2010 01:25 PM|
there's a few writeups out there, but basically as IG said.
only thing I'd add is to mask off the tires. (it doesn't have to be perfect, but the better you do, the less work you have afterwards.)
It'd be wise to remove the wheels from the vehicle. If there are any wheel weights on the outer lip you may want to remove them, then do all the painting, then let them cure for a cpl days, then reapply the weights...making sure you apply them in the correct locations.
Scuff them so the paint can adhere, priming is always a good idea.
minimum of 2-3 light coats of paint is a good number usually.
a coat or two of clear
|09-28-2010 01:18 PM|
|InfernoGirl||Degrease, scuff, clean again, spray, clear, dry, done.|
|09-28-2010 12:03 PM|
Need suggestions for Painting the Alloy
Hello.., Tomorrow i will be taking a Black colored JKU from the Showroom, first thing i may MOD is the color of the alloy from stock to black mat color. I feel like doing it myself, can some one refer the method like doing with a spray can etc ?