|10-01-2010 07:56 AM|
|Kilroy||Our local NAPA has a good nut/bolt selection.|
|09-30-2010 03:50 PM|
|09-30-2010 03:16 PM|
|bobjenkins||my home despot is awesome entire isle of fasteners|
|09-30-2010 03:12 PM|
actually my home depot is pretty good, not the best but they have most average hardware
so needless to say my quest there was a success
6 - 1/4 inch x 1 1/2 bolts
6 - 1/4 inch nuts
12 - 1/4 inch washers
1 - fastened hard top
ha!, i got there by tieing the top down with wire
|09-30-2010 02:40 PM|
|TerrorJ2001||My Home Depot didn't have that, I went to Ace Hardware|
|09-30-2010 02:35 PM|
|Jerry Bransford||Good luck at Home Depot, I have completely stopped going there for hardware. My local HD used to have an aisle devoted to hardware and now it's down to 2/3 of an aisle. They rarely have what I need any more, they only stock the fastest moving sizes now and have completely stopped carrying anything else. Heck I even tried to find some 1/4x28 nuts there a few weeks ago and they no longer even carry that size.|
|09-30-2010 02:29 PM|
|jvinch76||awesome, thanks guys....on my way to home depot i go|
|09-30-2010 02:27 PM|
I believe it's M16 metric thread size fine
That should match the rectangular nuts that come with the hard top....
Or you can put your own and not worry about it.
|09-30-2010 02:24 PM|
|Jerry Bransford||There is no specific required size, you can select your own nuts and bolts so long as the bolt fits through the hole. I no longer have a hard top but the six small nuts and bolts weren't much bigger than maybe 1/4", maybe 5/16". No need for hardened hardware like Grade 5, standard duty will work fine.|
|09-30-2010 02:13 PM|
hard top bolts?
does anyone know the bolt dimensions (thread count and diameter) to attach the hard top to the tub?