|10-04-2010 01:00 PM|
|JeepnJim||My Jeep had a 3" BL and 32" tires when I bought it. Other than looking janky I had no problems with rollovers and none of the 3" spacers ever broke. It actually handled great on corners as well. I replaced the 3" with a JKS 1.25" and 31" tires and it looks much, much better. I will go back to 32" tires sooner or later. Somewhere I had a thread with photos.|
|10-04-2010 11:45 AM|
|mrcarcrazy||its wise to do the MML - esp if you plan on adding a suspension lift. as it will allow you just a bit more room before you either need a Tcase drop, or SYE.|
|10-04-2010 11:20 AM|
|jgorm||You never have to do a MML at the same time as the body lift, but if you are going to do a MML sometime in the future, then do it at the same time so you wont have to move the fan shroud.|
|10-03-2010 07:52 PM|
|tex00000||with the 1.25" do you have to do a mml?|
|10-03-2010 06:17 PM|
|mrcarcrazy||BB or MCE fenders would give you clearance on the front.|
|10-03-2010 06:12 PM|
|doclouie||A 2" BB will fit 33s with a little fender trimming. 31s will fit with no lift at all.|
|10-03-2010 05:57 PM|
|BUCpride020||alright thanks guys, 3 inches seemed like overkill to me for a body lift. time for new tires and im tryin to fit some 33s on there. i can barely afford those tires let alone a lift too haha|
|10-03-2010 05:50 PM|
|burton160w||You'll find most people here aren't going to recommend anything over 1.25" Besides the issue with safety they create a noticeable gap between the bumpers and the body. They also do nothing more then allow a higher tire clearance, and therefore, you risk a higher chance of roll-over.|
|10-03-2010 05:47 PM|
Yeah, definitely a bad idea to go with a 3" body lift...
Only body lift i would consider would be a 1" from performance accessories.
|10-03-2010 05:38 PM|
|mrcarcrazy||body lift over 1.25'' is a bad idea.|
|10-03-2010 05:31 PM|
body lift question
has anybody had any problems with a body lift as high as 3 inches?