|10-10-2010 09:34 PM|
|10-10-2010 08:32 PM|
|jeepin82||Haha sitting in a fridge is an awesome description...|
|10-10-2010 02:15 PM|
|NAVYCHIEF||the hard top gets just as cold as a soft top. in my opinion. kinda like sitting in a fridge..|
|10-10-2010 12:14 PM|
|Nightly||Thanks guys, I'll get working on changing the fluids and working on the vacuum.|
|10-10-2010 06:58 AM|
|10-10-2010 05:59 AM|
|10-10-2010 05:51 AM|
Check the frame to make sure it is solid. Take a look at the rear where the shackles mount to the frame. This can be a problem area. Also check the front where the steering box mounts to the frame.
Change all your fluids. This way you can make sure they're all clean and you know you have a good starting point. Check your vent lines to make sure they are all in place. Check the 4WD vacuum lines. Mine were bad. They are plastic and get brittle over the years. Especially where they run near the exhaust.
I just picked up my first Jeep this spring and love it!
Post some pics and we can give you some more ideas. Have fun and don't forget to wave.
|10-10-2010 01:18 AM|
|10-09-2010 10:02 PM|
|FNjeep||Sell the hard top and get an OEM Soft -Top.|
|10-09-2010 03:41 PM|
Check for any leaks( motor differentials trans etc) grease all joints. Check all fluids. Change if nessisary.
Mods on a budget.... Hummm. Not real sure. I changed the muffler and intake and got a few more horses out of it. Complete tune up probly wouldn't hurt. If needed that is
|10-09-2010 03:30 PM|
The biggest thing is that I don't know what has been done to it and how to find out.
|10-09-2010 03:16 PM|
|Yjwolf||What u wanting to know? Possible problems or mods|
|10-09-2010 02:09 PM|
So, I recently bought a '91 Jeep Wrangler Sahara about two months ago and don't have a lot of money, currently...
It has a 2.5in lift, 31 tires, hard top. I'll get some pictures up later...
What should I check for, I am the 3rd owner and new to 'Jeeping'. I know the first owner put a lot of effort into it (herculined, cut out the front fenders (why?), and probably more...) so what should I look for?
Currently I am thinking about cleaning up and painting a hi lift of my dads he gave me, but I don't know how I can mount it... I'd like to mount it inside over the wheels or somewhere on the back, any advice?
Can anyone recommend some cheap modifications that I should get?
Any advice is appreciated and thanks in advance. I'll try to get some pictures up tomorrow.