|10-15-2010 11:27 AM|
Protect the nuts with duct tape or a small piece of cloth, and used the vice grips snugly.
Lots of inexpensive multi bit security sets on the market (containing torx, hex, etc.) which should have a bit that works. Something similar to this. http://www.electronictoolbox.com/cat...81/5364957.htm
|10-14-2010 08:49 PM|
|bobsalmon||Vise grips and don't be bashful. Use PB blaster liberally the crush down with the V-grips and use a lot of force. Throw the nuts away when you're done.|
|10-14-2010 07:16 PM|
|03 RUBI||Right tool for the job.......use an allen and you won't have to worry about it slipping and doing damage to your doors.|
|10-14-2010 05:57 PM|
|jgorm||Use a small pipe wrench.|
|10-14-2010 03:27 PM|
I think this is what you are referring to.
|10-14-2010 03:19 PM|
|Neil F.||All they require is an Allen. Quadratec Exclusive DN-9706 - Anti-Theft Hinge Pin Nuts for 97-06 Jeep® Wrangler TJ & Unlimited - Quadratec|
|10-14-2010 03:07 PM|
|Boosta||I think he meant the nuts on the bottom of the doors, not the wheel locks.|
|10-14-2010 03:03 PM|
Use a vise grip pliers to get those off. You may end up scratching those nuts though! I had too...
|10-14-2010 03:00 PM|
|VHunter||Last time I bought a used car that had security nuts but no key, I took it to discount tire. They charged me $10.00 a tire but they took them off and replaced them with regular lug nuts.|
|10-14-2010 02:14 PM|
cant get off anti theft nuts
i bought my jeep last spring from a lady and at the end of this summer when i tried to take off the doors i realiz4ed that she had put the anti-thft nuts on the bottom of the door, does anyone know how to get these of without buying the tool