|10-24-2010 02:33 PM|
|moneypit-TJ||herculiner is good stuff. dirt doesnt clean off it easily though if thats something you care about.|
|10-22-2010 02:33 PM|
|10-22-2010 09:24 AM|
|TDCoffee||Well what I ended up doing is rolling on rustoleum bed liner. Has some texture to it and appears to be super durable. I can touch it up quickly if it ever scratches.|
|10-21-2010 11:28 AM|
|Peepers||I just used a can of duplicolor or rustoleum bed liner for my bumbers. it was real easy and if I scratch it, just bed line over it.|
|10-21-2010 11:09 AM|
The herculiner is super bumpy!
|10-21-2010 01:07 AM|
|jeepin82||you should go buy a can of Duplicolor truck bed coating. Its an awesome flat/satin finish thats not real bumpy just textured. I have all my bumpers, fender flares, and both front fenders done with it. VERY awesome stuff!!|
|10-20-2010 03:11 PM|
|Ibuildembig||raptor liner has no bits....and there is a company on ebay that sells their own brand that comes with the bits in a baggy that you can put in if you want...I have some of theirs but haven't sprayed any yet|
|10-20-2010 03:05 PM|
|fourbangin||black undercoating works great i think it looks like powder coating and it comes in a spray can so if it gets banged up all you need to do to fix it is take a trip to auto zone or orileys and buy a new can|
|05-25-2010 02:04 PM|
|Cons_Table||There is a guy that actually just opened up a thread where he lined his whole jeep. He used monstaliner which does not look near as bumpy and rough, but has that bedlined look. I think I also remember reading that it does not have the rubber chunks in it which makes it not quite as aggresive in texture. Unless you are looking for the bedliner look, I would also just stick to a spray paint...makes for easy touch ups|
|05-25-2010 01:19 PM|
Flat black front
Flat Black rear
|05-25-2010 12:54 PM|
|drivebytruckerz||Flat black costs a dollar. And you can get another can and another and another..|
|05-25-2010 12:42 PM|
Herc has got quite a roughness to it. And to be effective, it needs to have 2 coats so even as thin as you could make it, it would be fairly thick.
I wouldn't powder coat anything like a bumper as when you scratch it (and you will) it is nearly impossible to match without re-powder coating it.
I recommend finishing the bumper, mocking it up and then roughing it up with a 3M pad, cleaning it with some acetone, 2 coats of self etching primer and the paint of your choice. You'll always have or be able to get matching paint for touch up.
|05-25-2010 11:17 AM|
I am in the process of building a new Bumper and was thinking about using herculiner. My question is how "bumpy" are the little rubber bits? Is there a product that would have smaller bits or even no bits. It seems that the bits would be great for traction on a floor surface, but as this is a bumper its not really needed. Perhaps something closer to the look of powder coat with more durability?