|11-23-2010 10:11 AM|
Sorry I forgot to get back to you on this. Yep, we can paint the plate black before assembly.
|11-20-2010 08:41 PM|
|XtrmTJ||Any word on the "Black" plate for the winch switch ?|
|11-08-2010 10:56 AM|
Kate: A good spot for the winch switch that I have found is next to the steering wheel column. Erickpl did a nice write up which I will steal a picture from:
The dimensions are 2" x 2.5". They are made for us by a local Jeeper who has been making them for local 4WD shops for a while now. He really does a great job. I will ask about the black plate, we might be able to get one made one-off that is black.
Here is a link to erickpl's (Paul) very nice write up:
IndyJeepMan: Yep, they are Maxxima lights. Thanks for the idea on a writeup, I could do one up and get it on here probably some time this week. As long as you are ok with soldering, it is really a pretty easy mod to do just involving a couple of rectifier diodes and a 560 Ohm resistor.
|11-07-2010 08:53 AM|
Looks awesome! I have those same lights. Maxxima by chance? lol
Anywho I'd love a write up on how to change the wiring to get them to work!
|11-07-2010 08:36 AM|
That's something I've been wanting to do for some time now.
Mounting position has been a real concern for me.
A couple of questions:
Is it available with a black plate so it would blend into the dash?
What are the dimensions of the plate?
|11-04-2010 02:22 PM|
In-cab winch switches & 3/4" LED Marker Lights
In case you haven't stopped by the website in a while, we now carry in-cab winch switches as well as the 3/4" LED marker lights.
(Note: the 3/4" LEDs are a 2-wire light (on or off), and do require a little modification to the Jeep's wiring to make them function correctly as BOTH a marker and turn signal. Feel free to PM or e-mail me at email@example.com with any questions)
Shop On-Line | Modern Classic Enterprises