|02-26-2006 01:52 AM|
|wazzupwhite||the new skid is in!!! it took me and a buddy about 3 hours to install. thanks for the tips using the Schraeder valve released the pressure easily. we also installed the Nth degree engine skid. I now feel like I have a pretty protected under belly. still waiting on the Shrockworks rocker guards and can't wait to get them installed. once I get them on in the next couple weeks I will try and get some pictures of my jeep on here somewhere. thanks again for all the help.|
|02-23-2006 07:16 PM|
|wazzupwhite||cool thanks guys. i will post how the swap went.|
|02-23-2006 02:31 PM|
|02-22-2006 06:58 PM|
thank you for the tips. I will use them. I found another way on another site last night here is what they said to do.
3. You will need to release the pressure in your fuel system. To do this, remove your fuel cap and then pull your fuel pump relay from the PDC as shown in the pic to the left. Start and run your engine until it stalls. Attempt to restart your engine until it will no longer run. Turn off your ignition and then disconnect the negative battery cable.
I think your way is the correct one to take. any thought on what option would be better?
|02-22-2006 06:13 PM|
I snagged the image off one of the many listings I saw on Ebay for the manual.
|02-22-2006 02:45 PM|
The fuel pressure is easily released via the Schraeder valve you'll find located on the fuel rail between the fuel injectors. Unscrew the black plastic cap and after placing a towel underneath it to catch the small amount of fuel that will squirt out, push the center pin to relieve the pressure.
It's just a bigger version of the same valve used on our tires to air them up.
|02-21-2006 10:26 PM|
|wazzupwhite||that would be it. where did you find it?|
|02-21-2006 09:19 PM|
|02-21-2006 09:07 PM|
|wazzupwhite||i have been looking online and i can't seem to find any for tj specific. is there one?|
|02-21-2006 08:53 PM|
|amerijeep||Any parts house usually carries Haynes and Chiltons|
|02-21-2006 08:34 PM|
fuel pressure release 2000 tj
I am brand new to this site and am very impressed with the info I have found already. I see many hours at work reading when I should be working. LOL
anyway here's my question. I bought a kilby gas tank skid and need to release the pressure in the fuel line before dropping the tank. and I don't have a service manual yet. so first question where is the best place to get one quick. I want to install this this weekend. what is the best one to get. I also have rocker guards and a Nth degree engine skid on the way so I'm sure I will need the manual for something else soon. any help would be appreciated.
if it is easy maybe someone could post the procedure for the pressure release. thanks