|11-26-2010 09:06 PM|
As stated, be at a 'slow roll' when you go for 4Lo. Give it a good yank, too. If you don't get it fully engaged, it'll grind, like you described above.
|11-26-2010 07:57 PM|
|workingdad||Thank you all for the help. I took it over to a friends house today who is an avid jeeper we took it out and he put it 4hi and it did engage but he said it go up to where it should and didn't engage then when he push it down just a little and it engaged ( with some GRINDING ) and when we put it and 4lo we could really feel the difference !!!!!!!!!!!!!!!!! I think im goin love jeeping but the light never came on ? so I don't know about the GRINDING and the lever position? But the 4x4 seem to work yes we were moving for 4hi and stopped for 4lo|
|11-26-2010 11:57 AM|
According to the manual, either can be engaged moving or not, however the recommended method is to roll 2-3 mph max when engaging 4LO to avoid grinding.
In my travels, 4LO engages easiest for me at a full stop. The wife's XJ/auto engages best when at a full stop and transmission is in PARK. 4HI is easier, and can be engaged on the fly at just about any speed up to 50 mph. max.
The 4WD light should have come on when you engaged 4HI. Check the bulb.
|11-26-2010 04:10 AM|
|11-26-2010 04:03 AM|
|Tj Timmy||I don't have it here with me but I beleive the manual says that your supposed to be rolling 5 mph while putting it in 4 low.|
|11-26-2010 03:03 AM|
|jasonwrangler||you can be both moving and not moving when shift into 4Hi, but for 4Lo you need to stop|
|11-26-2010 02:47 AM|
|workingdad||Thanks for the response so I need to be moving when I pull the lever to engage the 4x4 ? I will try that in the morning before I take it back to the car lot i bought it from and run over the salesman .... lol just kidding !!!!!!!|
|11-26-2010 02:20 AM|
Back in the "old days" before "shift-on-the-fly", you have to manually lock your hubs in. Now, they're supposed to be automatic. Pfft!
|11-26-2010 02:14 AM|
ok I have a 2001 wrangler sport 4.0 5 speed manual. I tried to put it in 4hi tonight and I got nothing no light on the dash no difference in driving so I tried 4lo and I got a grinding at witch time I got very how shall we say PISSED !!!!!!!!!! but this being my first jeep I don't know. It did not come with an owners manual so I have no reference point and when I shifted to 4x4 I was not moving and in nutral so please help me ?????