|05-31-2013 01:49 PM|
Did mine a few weeks ago... Came out great!
|05-31-2013 01:39 PM|
Edit: Didn't mean to bring this back from the dead. Please forgive me!
|04-23-2013 08:55 AM|
|Wrangler1771||Just spent the $20 bucks on the one from ebay.. gorilla glued the zip tie hangers, looks good and I hope it lasts!|
|04-11-2013 12:43 PM|
|03-15-2013 02:52 PM|
|011Crmn||I just did my grill on Tuesday. I went with the plastic gutter guard method and while I was at it I plasti-dipped my grill. It's snowing again now so we'll see how it all holds up. Thanks everyone for the ideas|
|01-25-2013 01:57 PM|
I did mine last week and originally used JB weld, with the sticky foam peeled off each square, but after a couple days some squares started coming off. Not sure if I didn't mix the ratio quit right, but I've used JB weld numerous times with no issues before now. Anyway, I went back and gorilla glued them all back down, and no issues so far.
Nice little mod
|01-25-2013 12:38 PM|
|Jdpatt12||Went to Lowes and picked up parts for this Mod. I also got the epoxy. I spent $26.88. I will need to wait for warmer weather.|
|01-22-2013 03:59 PM|
Here is the link
M-D Building Products 84327 .020-Inch Thick 3-Feet by 3-Feet Small Hole Aluminum Sheet, Black - Amazon.com
|01-21-2013 10:33 AM|
|01-16-2013 10:25 PM|
No regrets at all!
|01-16-2013 09:40 PM|
|05-30-2012 09:37 AM|
Finished mine up yesterday. I epoxied the zip tie squares and let them set up over night first. Easy and cheap! Thanks for the write up everyone!
|05-28-2012 05:31 PM|
Here are a few pics of the process.
Step 1: attach zip tie anchors with Gorilla Glue
Step 2: attach Grill Guard AKA gutter guard using zip ties
Step 3: Snip all the Zip tie ends.
Step 4: Re-attach grill to Jeep.
Step 5: Crack open a beer and jump in pool!!
|05-28-2012 05:24 PM|
Completed the grill mod this morning. The pictures aren't great but they work. Easy MOD that makes a huge difference.
|05-27-2012 10:46 PM|
|jlr551cfd||Thanks CRNA, I hope to have the same luck!|
|05-27-2012 08:25 PM|
|05-27-2012 12:08 PM|
|Rida29r||Anyone do this mod around a hood lock yet?|
|05-27-2012 07:07 AM|
|05-26-2012 08:09 AM|
|05-26-2012 01:27 AM|
Heres mine. I started with the original double sided tape on the tie blocks, however after a month of the great Chicago weather (85 and sunny one day and 40 and rain the next...) a few had popped loose. I removed them all and replaced the tape with 3M body panel adhesive tape (any auto parts or hardware should have it) its been golden ever since!
|05-25-2012 01:46 PM|
|moscoeb||That red looks awesome! I never would have thought to do that.|
|05-25-2012 12:50 PM|
Posted this already, but figured I'd ad to this thread..
Yeah, did this last week. It was pretty easy. Love the look.. Only thing was, I used Liquid nails to hold the zip clips on and with the humidity, the didn't set overnight. Ended up wiping them off & using gorilla glue.. Nice & tight with metal zip ties for security.. A little red for color!
|05-25-2012 11:32 AM|
Did the grill mod this week. I used epoxy on the zip tie clips and let it dry over night. Such and easy mod to do. Thank you all for the post.
Before and Afters.
|04-10-2012 08:54 PM|
OK... I did the mesh today AND plasti diped the grill ... ran out of daylight (and warmth) so I brought the grill into the house to dry... Here are some pic's... I'll post what it looks like on tomorrow.
|02-22-2012 11:44 AM|
|02-22-2012 08:52 AM|
|02-22-2012 08:13 AM|
|su18||Anybody's blinkers stop working after this? :/ I did this mod this weekend and the lights still turn on if I turn my fog lights on but they won't work if it's just the turn signal. I also checked the hazards and they don't work either|
|02-17-2012 06:41 PM|
What an easy mod. Not sure if I'm going to even paint it. Maybe later.
|02-05-2012 01:56 PM|
|kabory||Mine did not last. I just relied on the adhesive tabs. Lasted a week. Removed and cleaned tabs of sticky foam backing. Tried Krazy Glue. Did not work, as soon as I tightened the zip, they popped off. Finally, sanded and cleaned the backside of grill thoughly. Purchased new clips and removed all foam backing. Mixed up J-B Weld for plastic and tabs are rock solid.|
|02-01-2012 12:43 PM|
|This thread has more than 30 replies. Click here to review the whole thread.|