|12-22-2010 08:05 AM|
|wlee3372||Thanks for the info - saved me some grief and time/effort. OK - then I'll have to revert to the standard switch!!|
|12-22-2010 07:39 AM|
|RB-10rubicon||COLDSRT is correct there is a crcuit board in them .but there is some room on the outside edges of that panel as long as you use a shallow switch|
|12-22-2010 01:31 AM|
|12-22-2010 12:50 AM|
|jp2611||If you mean like a rocker or toggle switch You can get those most anywhere-wal mart, Oreilley's a-zone, advanced, Meijer,-however it will not look just like the factory-or is that your idea?|
|12-22-2010 12:45 AM|
Where do you get a stock fit for that one switch by the hazard switch?
I have a 2008 Rubicon - there is a row of switches where the hazard switch is located (lock, sway bar, etc). There is one blank. I am wanting to install a light and would like to utilize that spot instead of adding a switch somewhere else.
I have not checked with the dealer, thought I would start here. Any ideas where to get a switch to fit there?? Looking just for an on/off switch.