|12-31-2010 12:48 AM|
|SUBZEROCOOL||Try your local scrap and steel yard, they should have it and at a good price. Then just have it PC or paint it your self|
|12-30-2010 11:24 PM|
|URascal||you can get diamondplate at Maryland Metals in Hagerstown, Md. comes 4 x 8 sheet, 1/8 inch thick. You can cut it and bend it any way you want. I just diamond plated my Jeep, rear corners, tailgate, under the doors, on top of the front fenders for about $600 would have saved a bundle had I bought a sheet and cut it myself.|
|12-30-2010 02:35 PM|
|12-26-2010 09:56 PM|
I saw it at Lowes today not super expensive, and I saw it at Tractor Supply as well. I think you could get Lowes to cut it in the exact measurements you want therefore you wont have waste.
Thats my plan, then I'm painting them and installing myself
|12-26-2010 09:52 PM|
|OsageJeep||In my experience, the chrome treadplate is aluminum and black treadplate is steel..you can paint the steel treadplate any color you want. it is a lot cheaper to buy it steel in no color at all really and then paint it black. a 4x8 sheet of aluminum is about 100 dollars where I get my supplies. just look up any metal stores..Wheeler Metal (Arkansas) is where I get my stuff|
|12-26-2010 11:40 AM|
Black diamon plate is just regular diamond plate painted or powder coated black.
|12-26-2010 11:39 AM|
Salvage yards sell metal. You can probably find some diamond plate there.
places like Triple-S Steel sells all you'd need for fab work. I'm sure there's a similar place in your area.
|12-25-2010 08:45 PM|
|JDsDream||There is a company called Eastern Metals that sells it pretty cheap. The only problem is that they sell to manufacturers only. Try contacting a local sign shop and see if they can order a sheet for you. It runs about 50.00 a sheet. Or you can do what I did, cut regular diamond plate, scruff it up a little and hit it with krylon. I've had mine for over 3 years and it hasn't chipped or scratched yet.|
|12-25-2010 08:06 PM|
|12-25-2010 07:39 PM|
Well, in that case, where can I get REGULAR diamond plate?
That and I can just cut it with a circular saw right?
|12-25-2010 05:53 PM|
|Peepers||I'm not familiar with black diamond plating, but I believe you can get it anodized or powder-coated after fabrication. there is always bedliner.|
|12-25-2010 05:24 PM|
Where to get black diamond plate?
Looking to fabricate my own rocker guards, but where in the world can I find black diamond plate?
I'm in md if it matters