|12-28-2010 09:27 PM|
|12-28-2010 09:05 PM|
|12-28-2010 08:22 PM|
|VVCG33||Thanks Not Jerry! Think a regular cordless drill will make it through with a good bit?|
|12-26-2010 09:05 PM|
If you just use your cordless screwdriver and some cheapo Black and Decker or Harbor Freight bit, you'll spend all day breaking crap and get nothing done.
|12-26-2010 08:48 PM|
|12-26-2010 02:57 PM|
|12-26-2010 02:51 PM|
|12-26-2010 02:29 PM|
This is the best pic I have the the stock tow hook that I took off my LJ. Bolts right up to the frame without drilling - at least on my Jeep. I'd sell it to you cheap if your interested PM me.
|12-26-2010 02:27 PM|
|pokey||Other than being easier on the strap itself, what are the advantages to using hooks as opposed to throwing the strap around the bumper like I did in the old days? Especially considering if you use inferior bolts the hook can come flying back ?|
|12-26-2010 02:23 PM|
|G54||You may have to drill a hole for that hook as Jerry said. Those nuts with the tabs are the no spin nuts I was talking about. They slide into the frame rail and won't spin as you tighten. Unless they break.|
|12-26-2010 02:20 PM|
Let's see if this link works
Original Replacement Parts 11236.04 - Rear Tow Hook in Black for 97-06 Jeep® Wrangler TJ & Unlimited - Quadratec
|12-26-2010 02:11 PM|
If you have the type of tow hook shown in the below photo, the below method of mounting is about your only option. It only involves drilline one hole though, the other hole is already there. Don't drill entirely through the frame, the hole is only on the outside edge. The washers and nuts are fished up through a small opening underneath that is already present. MAKE SURE not to drill through the entire frame... passing the bolts entirely through the frame and putting the nuts on the outside of the frame will squeeze the frame together and cause it to start collapsing inward, requiring you to have to constantly retighten the bolts which further collapses the frame. Passing the bolts through just one side of the frame and having the nuts and washers up inside is plenty strong enough and is the right way to install the tow hooks.
And if you buy more bolts for any reason, make sure they are either Grade 5 or Grade 8 which is stronger. Standard bolts are not strong enough for recovery purposes.
|12-26-2010 02:07 PM|
|G54||No working link in your post, but if it is the same rear tow hook that came with my LJ, it bolts right to the existing holes in the frame on the driver side. the bolt inside the frame rail is one of those "no spin" kind that may give you fits when you try to remove it. Mine bent and broke making things interesting.|
|12-26-2010 01:45 PM|
Anyone know how to attach these?
Just picked these up and they didn't come with directions
TOW HOOK, REAR, BLACK, RUGGED RIDGE, JEEP WRANGLER (TJ) 97-06, UNLIMITED (LJ) 04-06, SOLD EACH TOW HOOK, REAR, BLACK, RUGGED RIDGE, JEEP WRANGLER (TJ) 97-06, UNLIMITED (LJ) 04-06, SOLD EACH [11236.04]
I don't really want to drill a hole into the frame, but...