|01-03-2011 01:08 PM|
|Lariatryder||I replaced all of the battery cable including the one from the solenoid to the starter and she fired right up|
|01-01-2011 12:51 PM|
|01-01-2011 12:41 PM|
|Lariatryder||Would they have anything to do with why its not starting?|
|01-01-2011 12:28 PM|
|hannahuffster||In the power distrubtion center? Auto shut-down, horn, fuel pump, starter, foglights, a/c (if you got the last two) off the top of my head I think that is it...|
|01-01-2011 11:12 AM|
|Lariatryder||I'm going to replace all of the wires tomorrow. Does anybody know what the relays next to the battery are for and where to find them?|
|01-01-2011 08:13 AM|
|gennybro||In my opinion,any one that purchases that starter for 215 dollars,needs their head examined.|
|01-01-2011 07:31 AM|
|falatude||Definitely a bad connection somewhere. I have seen the factory crimp-on terminals go bad once you start messing with them. Check the connections at your battery first, then go to the connections at your starter. Make sure the wires are still firmly connected/crimped at the starter. Especially the red #10awg wire at the starter.|
|12-31-2010 11:17 PM|
that to... usually a bad starter will dim your lights, not kill all of the power. Thats a bad connection somewhere. If your terminals are good, check the other end.
I totally forgot until now! Check this,
I went deep into a hole with my left front and the whole jeep slammed pretty hard. I had the exact problem you do, I knew my cables where clean and tight and the battery was good but "snap" I would loose everything when hitting the key to start. I followed back the + wire from the battery and was able to easily move the bottom connection side to side on the bolt. I tightened up that nut and it was like a whole new starting system!
|12-31-2010 09:53 PM|
|12-31-2010 09:04 PM|
|hannahuffster||215$?!? Sounds like a rip-off for a starter to me when a lifetime at the parts store is like 45$...|
|12-31-2010 07:14 PM|
this is the place to buy a gear reduction starter that will end all your starter problems.
High Torque Mini Gear Reduction Starter for AMC & Jeep - eBay (item 250416056488 end time Jan-19-11 15:43:37 PST)
|12-31-2010 04:59 PM|
|Lariatryder||The battery cables are hooked up right and a brand new. I will try cleaning the connections to the starter tomorrow.|
|12-31-2010 04:54 PM|
|12-31-2010 04:28 PM|
I would also think something fried out when your battery "sparked"
|12-31-2010 04:28 PM|
|sevenservices||yup, classic symptom of loose/dirty battery terminal connections. Probably was the start of your issues. They need to be cleaned with baking soda and water at least every six months. as well they should be pulled off, sanded or wire brushed to ruff up the lead and put back on once per year. Nice and tight as well...|
|12-31-2010 04:02 PM|
|hannahuffster||Sounds like a bad ground when you go to start your jeep. May sound stupid but double check your battery terminals and motor ground wire...|
|12-31-2010 03:38 PM|
Starter help please.
Jeep wouldn't start this morning so I had the starter tested and the auto parts place said it was bad. Bought a new one had them test it and it worked. I was installing it with the battery connected and I got a few sparks. I disconnected the battery and kept on going. I turn the key on and nothing happens, no lights nothing. I try again and the lights come on push the clutch try to crank it the I hear clicking and then no more lights. What did I mess up. I have a new starter solenoid on it's way but idk if that's the problem. Thanks in advance.