|01-06-2009 11:13 AM|
Need an ashtray blank
Does anyone know where one could get an ashtray "Blank" for a 2000 TJ sport? My dilemma is that I have a hard top with wiper, Defrost, and Fog Light switches already being used. I am due to have the install done anytime now and I am really getting a little antsy about where I am going to mount the rockers for the compressor and both lockers..
Any suggestions are most helpful, but I really like the lay-out of erickpl's last pic..
I would really like to get a blank and just toss the ash tray!
|07-08-2007 04:14 PM|
switches in my RHD TJ
|07-06-2007 02:35 PM|
|erickpl||It's not mine. Found the picture on JU, not JF like I originally thought. The poster didn't mention anything about having to cut to make things fit. I know on MINE, I put one end in first, the angled the other in. It WILL be a VERY tight fit, but that is how you want it.|
|07-06-2007 02:13 PM|
|07-06-2007 01:58 PM|
Here it is.. from an 06 LJ...
And here's my 97...
And another option if you REALLY don't want to use the stock locations..
|07-06-2007 08:33 AM|
I've seen pics of the ARB switches mounting just fine on a 2001 and newer TJ. Over on JF... I'll see if I can find the pic..
It CAN be done. Those switches are VERY tight when you put em in.
|07-06-2007 01:15 AM|
These are from a 97: [IMG][/IMG]
|07-05-2007 11:26 PM|
|07-05-2007 11:20 PM|
|4Jeepn||Shop did mine for me.. I told them what I wanted, and visa took care of the rest. AEV also has one that mounts near the dash, but I think its only a two hole box.|
|07-05-2007 11:11 PM|
Not what I have, where your three switches are I already have 4 factory slots, 2 used for the rear wiper and rear def but the overhang on the top interferes with the arb switches and the switch cover. Where you ashtray is I have a big blank area but it has 3 standoffs behind it. Once the third switch gets here tomorrow I'll be exercising my coping saw I think. Did you cut 3 seperate holes one big one ? Thanks.
|07-05-2007 11:06 PM|
Here's where mine are.. pic's not the best.
|07-05-2007 10:54 PM|
ARB switch mounting pics
Anybody got any pics of a 2001 TJ w/o the ashtray option. Just finished installing two arb's in front/rear D44's. Got three switches, front, rear, compressor. Tried using the two empty blanks in the panel but that little overhang on the top of the switch and the rocker type cover is not working out. Got a feeling I'm going to have to mount them in that empty square area after cutting out the 3 standoffs that were used for the airbag disable. Thanks.